IMX4T108

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Not For New Designs
Transistor Type:	2 NPN (Dual)
Current - Collector (Ic) (Max):	50mA
Voltage - Collector Emitter Breakdown (Max):	20V
Vce Saturation (Max) @ Ib, Ic:	500mV @ 4mA, 20mA
Current - Collector Cutoff (Max):	500nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	56 @ 10mA, 10V
Power - Max:	300mW
Frequency - Transition:	1.5GHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	SC-74, SOT-457
Supplier Device Package:	SMT6
Base Part Number:	MX4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the IMX4T108

The IMX4T108 is an integrated circuit (IC) designed by Mitsubishi Electric Semiconductor company. It is a low-power, high-speed, complementary metal oxide semiconductor (CMOS) transistor array. The use of this device is primarily for high isolation and high switching speed applications. It is designed to be used in small and low-power electronic circuits. The IMX4T108 features four transistors and eight resistors that are connected directly to the top side of the device.

Applications of IMX4T108

As a professional and efficient transistor array, IMX4T108 can perform in many different applications. In low-power and low-speed applications, IMX4T108 can be used as a power switch. It can also be used as a high side switch since it can be driven by an input voltage as low as 5V. Furthermore, it can be used as an output switch in applications that require a low operating current and fast switching speed. IMX4T108 can also be used in various telecommunication and audio equipment where high switching speed and high isolation are required.

Working Principle of IMX4T108

The IMX4T108 is composed of four transistors, each of which consists of four control terminals and one output terminal. In each of the four transistors, two control terminals are connected to the positive and negative power supply pins of the device, while two other control terminals are connected to the logic input or output pins. When a logic high or low level signal is applied to the logic input of a transistor, the device will operate in either the saturation or the cut-off region. In the saturation region, the logic output is high, while in the cut-off region, the logic output is low.When the transistor is in the saturation region, it will be in the on state and will allow current to flow from the positive power supply pin to the output terminal and to the negative power supply pin. When the transistor is in the cut-off state, no current will flow through it. This is the basic working principle of IMX4T108.

Conclusion

The IMX4T108 is a low-power, high-speed transistor array with four transistors and eight resistors that can be used for high isolation and high switching speed applications. It can be used for low-power and low-speed applications such as power switching, high-side switching, output switching, and audio or telecommunication equipment. The working principle of IMX4T108 consists of two states, saturation and cut-off, and the logic output of the transistor is determined by its input voltage. Therefore, it can be seen that IMX4T108 is an efficient and powerful device for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description