INA105KU/2K5 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

INA105KU/2K5 is a type of Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps which is specified for instrumentation applications. They are specifically designed for a wide dynamic range, low-input offset voltage and low-power consumption, making them a suitable choice for instrumentation applications that require accurate, precise and reliable data. This type of amplifier is also highly resistant to noise and interference, undoubtedly making it an excellent choice for applications where low noise levels are an absolute necessity.

The INA105KU/2K5 offers several different options including single and dual devices. The single device configuration is made up of one op amp with a fixed gain set to 5, while the dual device configuration utilizes two independent op amps with a fixed gain of either 5 or 10 when operating under a gain of 5. Additionally, this type of amplifier also has a low power version which consumes the least amount of power while still providing a high level of performance. All these options give designers the ability to select the INA105KU/2K5 with the right attributes for their needs.

The operation of the INA105KU/2K5 starts with the input stage, which consists of an inverting amplifier. A differential input signal is then applied to this amplifier, resulting in an output signal that is opposite to the input signal in terms of its phase. This concept of inverting amplification is widely used in analog applications, as it helps to increase the gain of the signal and eliminates the need for additional gain stages. The output from this stage is then amplified to the desired level, by the use of a power amplifier stage.

The power amplifier stage of the INA105KU/2K5 uses two MOSFETs to carry out the amplification process. Here, the two MOSFETs act as switches that can be controlled by the applied input signal. The switches operate in complement to each other and when they are on, they will allow current to flow through the amplifier and increase the output power. When they are off the current is prevented from flowing, and the output power is limited. This is how the amplifier can create a high gain with a minimal amount of power.

Finally, the output of the amplifier stage is passed through another stage, often known as the power output stage. This stage is also known as the current buffer stage and could contain additional operational amplifiers or transistors, as well as gain control circuits. In this stage, the amplifier amplifies the output from the power amplifier stage and provides a clean and safe output signal that is suitable for use in the application.

The INA105KU/2K5 is a versatile and reliable Linear - Instruments Applications, OP Amps, Buffer Amps available for instrumentation applications. It offers a wide range of options accommodating different power requirements and voltage requirements. Additionally, it also offers a low input offset voltage and low power consumption, making it a highly suitable amplifier for instrumentation applications that require accurate, precise and reliable data.

The specific data is subject to PDF, and the above content is for reference