INA125UA/2K5

Voltage - Input Offset:	50µV
Base Part Number:	INA125
Supplier Device Package:	16-SOIC
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 36 V, ±1.35 V ~ 18 V
Current - Output / Channel:	12mA
Current - Supply:	460µA
Series:	--
Current - Input Bias:	10nA
-3db Bandwidth:	150kHz
Slew Rate:	0.2 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	Instrumentation
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA125UA/2K5 is an operational amplifier designed for instrumentation, op amp, and buffer amp applications. This amplifier has a wide range of uses, from high-precision instrumentation to analog signal processing.The INA125UA/2K5 has a wide frequency response and is capable of operating at high speeds. It has a low droop rate for stable operation in dynamic environments. Additionally, this amplifier has a low-input noise level and a high-input bias current. This makes it a good choice for applications that require fast, stable operation with low input noise.The INA125UA/2K5 has an offset voltage of 2.5mV and a input common-mode range of ±3.2V. This offset voltage and large common-mode voltage range, combined with the amplifier’s low noise, makes this amplifier a good choice for high precision applications.The INA125UA/2K5’s outstanding performance can be attributed to its advanced design. It uses a cascode input stage, a single-ended input stage and a P-channel JFET current source to minimize distortion and improve performance. Additionally, the gain of this amplifier can be adjusted using an external resistor, which gives it a wide range of applications.The INA125UA/2K5’s working principle involves the amplification of an input signal with an adjustable gain. The input signal is applied to the non-inverting input of the amplifier. The gain of the amplifier is adjusted using an external resistor, connected between the non-inverting and inverting inputs of the amplifier. The amplified signal is then output from the amplifier’s non-inverting output.The INA125UA/2K5 is an ideal choice for a wide range of instrumentation, op amp, and buffer amp applications. Its wide frequency response, low distortion, low input noise, and adjustable gain make it a good choice for applications that require precise signal processing. Its wide range of common-mode voltage stability also makes it suitable for a range of different applications. Additionally, thanks to its low-power consumption and low cost, it is an ideal choice for cost-sensitive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description