INA132U/2K5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA132U/2K5 is an instrumentation amplifier, or \'in-amp\' for short, that is a type of operational amplifier (op-amp) designed to accurately amplify very small differential signals from a wide range of sources. As its name implies, the INA132U/2K5 amplifies the input voltage, so the output can be used to measure the input. The INA132U/2K5 is an excellent choice for many applications, especially those that require precise and reliable signal measurement.

The INA132U/2K5 incorporates a number of key features, most notably a unity-gain bandwidth of 10MHz and a differential input impedance of 114 kΩ. Additionally, the device has an input offset voltage of less than 60 μV and a common-mode rejection ratio of 90dB. Combined, these features make the INA132U/2K5 well suited for a wide range of applications including industrial and automotive instrumentation, strain/pressure gauging, and medical testing and measurement.The INA132U/2K5 is also designed to be extremely reliable, with a maximum total harmonic distortion of 0.002% and a maximum total power dissipation of 250 mW. Its low-power design allows it to be used in battery-powered or portable applications where power supply noise is a concern.

When it comes to working principle, the INA132U/2K5 acts as an amplifier between its two input terminals. When there is a positive input signal applied to the positive input terminal, the INA132U/2K5 will amplify the signal, while a negative input signal applied to the negative input terminal will cause the op-amp to reduce the signal. The output signal is then determined by adding or subtracting the two inputs.

The INA132U/2K5 is capable of amplifying both AC and DC signals, and it is also capable of differentiating between AC and DC signals. This is accomplished by its two input terminals, which are connected to two separate voltage rails - the positive rail and the negative rail. By amplifying each signal independently, the INA132U/2K5 is able to accurately measure both the amplitude and the polarity of the input signal.

To ensure a reliable measurement, the input signal should not exceed the range of the device. Additionally, the device should not be overloaded with signal, as this could affect the accuracy of the measurement. Similarly, if the device is used in a circuit with high power, it is important to ensure that the device is not overloaded as this could result in inaccurate measurements.

The INA132U/2K5 is an excellent choice for applications that require accurate and reliable signal measurements. With its high input impedance, low total harmonic distortion, and wide bandwidth, the INA132U/2K5 is a great choice for applications such as industrial and automotive instrumentation, strain/pressure gauging, and medical testing and measurement.

The specific data is subject to PDF, and the above content is for reference