INA211AIDCKRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA211AIDCKRG4 is a low-power, low-noise current amplifier designed for use in linear applications, instrumentation, op amps, and buffer amps. It features an integrated digital-to-analog converter (DAC), an amplifier, and a power supply. The DAC provides calibrated input current with a selectable resolution of either 8 or 16 bits. The amplifier senses the current at the inverting input and converts it to a voltage. The voltage is then amplified and the power supply provides the necessary voltage and current levels.

The INA211AIDCKRG4 is typically used in current-output sensing applications in order to convert an analog input current to a digital value. The current input signal is applied to the inverting input of the amplifier, and the output signal is proportional to the signal current applied. The DAC provides a precise and stable reference voltage for the signal input, which allows for precise and repeatable signals even in noisy environments.

The device can be used for current or voltage sensing applications. For current sensing applications, the amplifier can be used as a voltage-to-current converter by simply adjusting the amplifier\'s gain. The amplifier can also be used for voltage-sensing applications with the addition of an external resistor.

In addition to the converter, the amplifier from the INA211AIDCKRG4 also includes a synchronous rectifier stage, a buffer, a low-pass filter, and a voltage reference. This provides high performance and low noise operation. The synchronous rectifier stage provides fast response times, while the buffer acts as an impedance-matched buffer stage to reduce the impact of the capacitance of the input signal. The low-pass filter provides a low frequency response and reduces noise and distortions. The voltage reference stage provides a low-noise, low-offset voltage reference, enabling accurate and stable operation over the full temperature range.

The INA211AIDCKRG4 offers many advantages. The device is accurate over a wide temperature range and has low offset and low-noise operation. With an integrated DAC, it provides easy calibration and offers a wide range of calibration options. It also has a power-on reset circuit that prevents erroneous data output during power-up and maintains the DAC in a safe state. The device has a wide operating voltage range of 2.3V to 5.5V and is able to operate at various speed/resolution combinations for various data acquisition requirements.

The INA211AIDCKRG4 is a low power, low noise current amplifier that can be used in linear applications, instrumentation, op amps, and buffer amps. With its integrated DAC, the device can be used in current or voltage sensing applications, and its synchronous rectifier, buffer, low-pass filter, and voltage reference enable it to provide fast response times, reduced noise and distortion, and accurate operation over a wide temperature range. The device offers a number of advantages including accuracy, low-offset, wide voltage range, and power-on-reset capabilities.

The specific data is subject to PDF, and the above content is for reference