INA211BIRSWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

INA211BIRSWR Application Field and Working Principle

Linear amplifiers are a type of amplifier circuit used extensively in the field of instrumentation, OP Amps, Buffer Amps, and more. It consists of an input stage followed by a number of gain stages. The gain is usually controlled by a voltage controlled gain element such as a field effect transistor (FET). The output of the amplifier is usually taken from the last gain stage. The INA211BIRSWR is a representation of the Linear Amplifiers.

The INA211BIRSWR is a precision, low-power instrumentation amplifier designed specifically for low-voltage, low-side current sensing applications. It is able to measure current down to mV levels. The device features a fully differential input amplifier with a gain factor of 502V/V. It also features a fast settling output stage. The device is capable of both single-ended and differential mode operation.

The working principle of the INA211BIRSWR is based on the input current being made up of two components: a common-mode component and a differential component. The common-mode component is an equal, but opposite, current flowing through each input (the current is referred to as a ‘swing’). This current is typically constant, as it is set by the common-mode voltage. The differential component is the difference between the input currents.

The INA211BIRSWR features a common-mode voltage range of 0V to 0.2V. The differential gain of the device is 502V/V, which means that for every 1V change in the differential input, the gain of the output signal is 502V/V. The common-mode rejection ratio (CMRR) of the device is a very low 3.6dB. This means that any signal that is common to both inputs is rejected by the device, allowing only the differential signal to pass through. The bandwidth of the device is 10MHz.

The main application of the INA211BIRSWR is in current measurement applications. It can be used to accurately measure very low currents with a very low input voltage range. It can also be used in industrial applications such as motor control, power supply control, and data acquisition. It can also be used as a precision amplifier in other instrumentation applications.

In conclusion, the INA211BIRSWR is a precision, low-power instrumentation amplifier designed specifically for low-voltage, low-side current sensing applications. It features a gain factor of 502V/V and an extremely low common-mode rejection ratio of 3.6dB. It is mainly used in current measurement applications, but can also be used in industrial applications such as motor control, power supply control, and data acquisition.

The specific data is subject to PDF, and the above content is for reference