INA215BIRSWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA215BIRSWR is a linear instrumentation amplifier with an operational amplifier (op amp) buffer amplifier. It is an integrated circuit that contains two op amps and two resistors to provide an effective and accurate way to measure current, voltage, and power for a wide range of applications. The INA215BIRSWR is a monolithic chip that is suitable for use in a variety of systems including medical, industrial, and commercial applications.

The INA215BIRSWR has a maximum input voltage of ±36 V and a maximum output voltage of ±17 V using a 5 V supply. The gain bandwidth product of the INA215BIRSWR is 1.5 MHz and the output current is over 800 mA. This op amp has an input common-mode voltage range from -2V to +2V, making it suitable for use in many different environments.

The INA215BIRSWR is designed primarily for instrumentation, test and measurement, data acquisition and power measurement applications. It is used in two-wire and four-wire sensing applications to measure small currents. It can also be used in current-sensing and power-monitoring systems to measure AC and DC currents and power levels in a wide range of application conditions.

The working principle of the INA215BIRSWR is based on the basic operational amplifier circuit. The two resistors in the application, R1 and R2, are used to convert the input voltage into a current, which is then amplified by the operational amplifier. The potential across the amplifier’s output is a measure of the input current. The gain of the amplifier is a function of the ratio of the resistance of the two resistors, and the gain can be adjusted by changing the values of the two resistors.

The INA215BIRSWR provides high accuracy and low drift, and its low power consumption makes it suitable for many portable and handheld applications where power efficiency is of paramount importance. It features an offset voltage, which is the difference between the amplifier’s input and output voltages, of less than 1 mV and a gain-bandwidth product of 1.5 MHz. This op amp also has excellent power-supply rejection, which means that variations in the power supply will have a minimal effect on the amplifier’s performance.

The INA215BIRSWR is a versatile instrumentation amplifier that can be used in a variety of applications. It is suitable for use in current-sensing and power-monitoring systems and in a wide range of noise-sensitive applications. Its high accuracy and low drift make it suitable for use in many instrumentation, test and measurement, and data acquisition and power measurement applications. Its low power consumption makes it suitable for applications where power efficiency is important.

The specific data is subject to PDF, and the above content is for reference