INA215CQDCKRQ1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA215CQDCKRQ1 Amplifier is a powerful and cost-effective device suitable for a variety of applications in the field of instrumentation, OP Amps, Buffer Amps and in-amplification circuit. It is an ideal choice for engineers and designers who need to amplify signals with a wide range of input levels and low at the same time and with a very low output noise. This precision device has an impressive output of 25 mV and a maximum supply voltage of 33 V, making it a great choice for high-end audio and professional sound systems.

The INA215CQDCKRQ1 is a very precise instrumentation amplifier with a single-ended input, two differential inputs, and a balanced output. It provides very precise gain control and is capable of accurately amplifying signals with a wide range of input levels. It can be configured as either voltage gain or current gain with a selectable gain above 1000. The selectable gain is achieved by connecting the resistor values to the amplifier inputs. This precision device also has an adjustable common-mode gain, dynamic range, and noise rejection. It also has low offset voltage and low bias current.

The INA215CQDCKRQ1 works on the principle of operational amplifiers or op amps. It is essentially a single chip amplifier with an output buffer amplifier that prevents amplitude distortions and increases the transient response of the amplifier. An op-amp is a basic three-terminal active device with a differential input, single-ended output and negative feedback loop. The op-amp responds to voltage difference and will adjust the gain or change the direction of the current flow to achieve a desired output voltage. Op-amps are normally used to amplify a range of input signals or to reduce the overall noise level of the output signal.

The INA215CQDCKRQ1 is designed with a chopper stabilised amplifier which is composed of a low-dropout regulator and an amplifier with a single-ended input and balanced output. The regulator is used to provide a constant supply voltage across the amplifier, eliminating any distortion that may occur when the input signal changes. The chopper stabilized amplifier also has a very low noise and high fidelity which helps reduce the overall noise of the system.

The INA215CQDCKRQ1 also has a high power supply rejection rate, which helps reduce any unwanted noise or interference from external sources. It is designed with an adjustable amplifier ranging from 10 mV to 25 V and a slew rate of up to 100 V/ms. The combination of low noise and high power makes this amplifier an ideal choice for high-end audio and professional sound systems.

In summary, the INA215CQDCKRQ1 amplifier is a powerful and cost-effective device suitable for a variety of applications in the field of instrumentation, OP Amps, Buffer Amps and in-amplification circuit. It has a single-ended input, two differential inputs, and a balanced output that provide precise gain control, adjustable common-mode gain, dynamic range, noise rejection and low offset voltage and bias current. Its low noise and high power make this amplifier an ideal choice for high-end audio and professional sound systems.

The specific data is subject to PDF, and the above content is for reference