INA240A3QDRQ1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA240A3QDRQ1 is an instrumentation amplifier that provides low-noise performance and wide bandwidth. It is designed for use in instrumentation and control systems that require precision with low-noise. This instrumentation amplifier is a 3-channel, single-ended, differential rail-to-rail amplifier with a gain of up to 10V/V. The INA240A3QDRQ1 is a low-power device that operates from a supply voltage of 2.7 V to 7.5 V, at a maximum quiescent current of 25 μA.

The INA240A3QDRQ1 is a precision low-noise instrumentation amplifier based on a simple three-amp configuration. It uses two high-gain cascoded amplifiers to buffer and amplify the input signals, and then a third stage to sum the amplitudes. The INA240A3QDRQ1 is designed to provide a high input impedance and a low output impedance that make it suitable for use in precision sensor interfaces, transducer amplifiers, instrumentation, and other applications.

The INA240A3QDRQ1 has a common-mode range of 1V to VDD and an input offset voltage of less than 500μV. It can operate in both single-ended and differential input configurations. It also has gain settable from 0.1 to 10V/V and a wide –3dB bandwidth of 440kHz. It has excellent PSN (Power Supply Noise) rejection and common-mode rejection ratio (CMRR) of 96dB making it ideal for applications with varying levels of noise and interference.

The INA240A3QDRQ1 can be used in a variety of instrumentation applications, including strain gauges, accelerometers, vibration detectors, and audio level detectors. It can also be used for measuring thermocouples, sanitary sensors, contact sensors, and other low-level voltage signals. It is also suitable for medical instrumentation and analog data acquisition systems.

The INA240A3QDRQ1 is simple to use as it requires no external components. It can be configured with either single-ended or differential inputs and can be used as a gain block. The output can be set with the gain-set pins and the output can be either single-ended or differential. The device also has an enable pin which allows it to be disabled if needed. The device requires just a few external components, so it is an easy and cost-effective solution for instrumentation and control applications.

In summary, the INA240A3QDRQ1 instrumentation amplifier offers a low-noise, wide bandwidth solution for a variety of applications. Its low-power operations and tiny package make it a great choice for precision sensor interfaces, transducer amplifiers, and other severe-environment instrumentation applications. The device is easy to use and requires no external components.

The specific data is subject to PDF, and the above content is for reference