Allicdata Part #: | 296-37865-ND |
Manufacturer Part#: |
INAEVM-MSOP8 |
Price: | $ 17.99 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Texas Instruments |
Short Description: | BARE BOARD UNIV INST AMP 8MSOP |
More Detail: | 8-MSOP Package 1 - Single Channels per IC Instrume... |
DataSheet: | INAEVM-MSOP8 Datasheet/PDF |
Quantity: | 8 |
Lead Free Status / RoHS Status: | Not applicable / Not applicable |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 16.35480 |
Specifications
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Channels per IC: | 1 - Single |
Moisture Sensitivity Level (MSL): | -- |
Amplifier Type: | Instrumentation |
Output Type: | Single-Ended |
Slew Rate: | -- |
Voltage - Supply, Single/Dual (±): | -- |
Board Type: | Bare (Unpopulated) |
Supplied Contents: | Board(s) |
Utilized IC / Part: | 8-MSOP Package |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
The INAEVM-MSOP8 Evaluation Board is a versatile platform designed to quickly evaluate and tune operational amplifier (op amp) products. It has been optimized for use in a variety of applications. The included control system allows for easy implementation of the common measurements for op amps, as well as the ability to configure and adjust the board to specific user requirements. This allows engineers to quickly develop, evaluate, and tune their op amp designs in the most efficient manner.Applications
The INAEVM-MSOP8 Evaluation Board was designed to help users evaluate a wide variety of op amp circuits. It is well suited for use in automotive, industrial, audio, and video electronics. It can also be used to evaluate DC and AC circuits, buffered voltage references, CMRR, common mode rejection, dynamic offset and other non-linearity parameters.The board can be used to evaluate linear and switched-mode power supplies,DC-DC converters, electrical motor drives, AC motor drive circuits, analog signal conditioning, filter and amplifier systems, and much more. The board also includes two ports for connecting external stimuli such as waveshapes and step functions, allowing for dynamic electrical measurements. The INAEVM-MSOP8 Evaluation Board has the ability to work with either single- or dual-op amp circuits. It can also be used to measure the thermal performance of op amps when operating in an environment between -10 °C~+85 °C.Features
The board includes several features designed to optimize the op amp evaluation process. The board has two inputs and one output and has the ability to measure both current and voltage parameters. It can provide measurements for DC, AC, and neutral components of feedback loops. It includes an onboard switching mechanism, which can be used to switch between AC and DC signals. The board also includes a wide selection of analog external interface pins along with a wide selection of digital interface pins, which allow for direct connection to a variety of external circuits. The board has an integrated vector network analyzer, which allows for the determination of the input and output impedances and the power transfer ratio of the op amp circuits. The analyzer was optimized to work with multiple types of op amps and can measure different parameter such as bandwidth, distortion, and gain-bandwidth.Working Principle
The INAEVM-MSOP8 Evaluation Board uses a unified control system to quickly and accurately evaluate op amp designs. The board includes an ADC/DAC/VGA system that provides the ability to easily configure and control the op amp designs. The board also includes a microcontroller for controlling the board and for controlling the evaluation process. The board utilizes digital and analog signals to enable the user to properly configure and evaluate their op amp designs. The digital signals are used to provide control information and to control the operating parameters of the op amp circuit. The analog signals are used to provide input and output data to the ADC/DAC/VGA system. The board also includes an on-board oscilloscope that is used to measure the gain and phase of the system and to observe any additional signals or transients. The oscilloscope is connected to the board\'s integrated signal generator, which can generate sine, square, and pulse signals. The oscilloscope is also connected to the board\'s dual-channel digital recorder, which allows for the recording and playback of dual-channel signals.Conclusion
The INAEVM-MSOP8 Evaluation Board is a powerful tool for evaluating, tuning, and testing a wide variety of op amp designs. It has been optimized to work with various types of op amps and allows for the configuration and control of op amp designs with ease. The board also includes an integrated vector network analyzer, a signal generator, a dual-channel digital recorder, an integrated ADC/DAC/VGA system, and a microcontroller for controlling the board and evaluation process. The board provides reliable and accurate analysis of op amp designs and can help engineers quickly and efficiently evaluate, tune, and test their designs.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "INAE" Included word is 2
Part Number | Manufacturer | Price | Quantity | Description |
---|
INAEVM-SO8 | Texas Instru... | 17.99 $ | 21 | EVAL MODULE FOR INA8-SOIC... |
INAEVM-MSOP8 | Texas Instru... | 17.99 $ | 8 | BARE BOARD UNIV INST AMP ... |
Latest Products
EK31
EVALUATION KIT, PA01, PA10, PA12PA01, PA...
AD8014AR-EBZ
BOARD EVAL FOR AD8014AR8-SOIC Package 1 ...
AD8009JRT-EBZ
BOARD EVAL FOR AD8009SOT-23-5 Package 1 ...
AD8017AR-EBZ
BOARD EVALUATION FOR AD8017AR8-SOIC Pack...
EK21
EVALUATION KIT FOR PA74PA74 Apex Precisi...
AD605-EVALZ
BOARD EVALUATION FOR AD605AD605 X-AMP Se...