Allicdata Part #: | 296-43446-ND |
Manufacturer Part#: |
INAEVM-SO8 |
Price: | $ 17.99 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Texas Instruments |
Short Description: | EVAL MODULE FOR INA |
More Detail: | 8-SOIC Package 1 - Single Channels per IC Instrume... |
DataSheet: | INAEVM-SO8 Datasheet/PDF |
Quantity: | 21 |
Lead Free Status / RoHS Status: | Not applicable / Not applicable |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 16.35480 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Channels per IC: | 1 - Single |
Moisture Sensitivity Level (MSL): | -- |
Amplifier Type: | Instrumentation |
Output Type: | Single-Ended |
Slew Rate: | -- |
Voltage - Supply, Single/Dual (±): | -- |
Board Type: | Bare (Unpopulated) |
Supplied Contents: | Board(s) |
Utilized IC / Part: | 8-SOIC Package |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Op Amps Evaluations Boards are products that help engineers measure the performance of their op-amp solutions. INAEVM-SO8 is one such solution, a powerful third-party Evaluation Board which can be used to accurately evaluate op-amps. This article will discuss the various application fields and working principles of the INAEVM-SO8.
The INAEVM-SO8 is suitable for prototyping, testing, as well as characterizing and debugging op-amp designs. The board is designed to allow for a more accurate measurement of circuit performance on modern, compact op-amps. It can be used by engineers to experiment with various configurations, and has an on-board adjustable power supply that allows for a finer control of performance measurement.
The INAEVM-SO8 can be used for a variety of application fields, including power management, audio processing, signal conditioning, motor control, and RF design. It comes with a variety of features, including a demo circuit designed specifically for prototyping, input and output terminals, testing facilities (including an adjustable power supply), and a hardware interface for monitoring and programming. This makes it useful for engineers who need to make on-site measurements or troubleshoot problems.
The working principle of the INAEVM-SO8 is based around its powerful evaluation software. This allows the engineers to configure the board in a variety of ways, tailoring it to meet their needs. For instance, they can adjust the parameters of the op-amp and the external components that they are using. They can simulate the circuit under different environmental conditions, or can tune it for their specific application. The software also allows them to see the performance of their op-amp under various configuration parameters, such as temperature, load, and input conditions.
In addition, the INAEVM-SO8 also enables engineers to test their designs to see if they are stable and consistent during the operation. This is important for any op-amp design, as an inconsistency or instability can cause major problems. The board also comes with a calibration software, allowing engineers to check whether the measurements from their device are accurate. It can even show them graphical representations of the measurements, allowing for easier troubleshooting.
Finally, the board also comes with a hardware debugging module that allows engineers to check for short circuits within their circuits, as well as open connections and other irregularities. This can help troubleshoot problems and make sure that the design is operating correctly.
Overall, the INAEVM-SO8 provides engineers with an easy, accurate way to evaluate op-amp solutions. It is a powerful tool that allows engineers to experiment with circuit configurations and optimize their designs for their specific application. With its powerful evaluation software, on-board adjustable power supply, and debugging hardware, the INAEVM-SO8 can be a valuable asset for engineers, making it ideal for a variety of application fields.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
INAEVM-SO8 | Texas Instru... | 17.99 $ | 21 | EVAL MODULE FOR INA8-SOIC... |
INAEVM-MSOP8 | Texas Instru... | 17.99 $ | 8 | BARE BOARD UNIV INST AMP ... |
EVALUATION KIT, PA01, PA10, PA12PA01, PA...
BOARD EVAL FOR AD8014AR8-SOIC Package 1 ...
BOARD EVAL FOR AD8009SOT-23-5 Package 1 ...
BOARD EVALUATION FOR AD8017AR8-SOIC Pack...
EVALUATION KIT FOR PA74PA74 Apex Precisi...
BOARD EVALUATION FOR AD605AD605 X-AMP Se...