IP4337CX18/LF/P,13 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks) are a type of electrical equipment used for preventing electromagnetic interference (EMI). They are commonly used in various electronics, such as cell phones, computers, and other devices.

The IP4337CX18/LF/P, 13 is a common type of EMI/RFI Filter. It is a low-frequency single-pole, three-wire network consisting of an inductance and two capacitors. The inductance is typically made of ferrite, while the capacitor is made of a dielectric material such as ceramic, mylar, or polyester film.

This type of filter is primarily used to reduce EMI noise on a power line. It works by limiting the maximum voltage or current that a device can draw from a power source. This, in turn, reduces the total emission of electromagnetic interference on a circuit.

In addition to reducing EMI, the IP4337CX18/LF/P, 13 can also be used to control the level of RF energy on a line. This type of filter is commonly used in RF communications systems, such as wireless LANs, to prevent interference. As the quality of the RF transmission is improved, the transmission range will increase.

The IP4337CX18/LF/P, 13 is also commonly used in television and radio signal transmission. It can be used to reduce the level of EMI interference on the coaxial cable and prevent signal distortion. This type of filter can also be used to improve the quality of the signal by reducing the amount of unwanted signals in a signal chain.

The IP4337CX18/LF/P, 13 is a useful tool for controlling the EMI and RF interference on a line. It can help to improve the quality of the signal, as well as reduce the amount of EMI on a power line. This type of filter can also be used in RF communications systems to improve the transmission range and prevent signal distortion.

The specific data is subject to PDF, and the above content is for reference