IPSLAT-A0500-5

Series:	IPSLAT
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	7.25 PSI (50 kPa)
Output Type:	Analog Current
Output:	4 mA ~ 20 mA
Accuracy:	±0.5%
Voltage - Supply:	10 V ~ 28 V
Port Size:	Male - 1/4" (6.35mm) NPT
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	Connector
Maximum Pressure:	72.52 PSI (500 kPa)
Operating Temperature:	-20°C ~ 75°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

Most process control and automation systems need to sense and control pressure levels. This is typically done by the use of pressure sensors or transducers. The IPSLAT-A0500-5 is one such device used in such applications.The IPSLAT-A0500-5 is a pressure sensor designed for use in process control and automation operations. It is a compact, robust device capable of measuring pressure from a wide range of sources, from vacuum to a pressure of up to 5000psi (350 bar). The device has a wide range of features designed to provide reliable, high accuracy measurements.The IPSLAT-A0500-5 pressure sensor is designed to measure the differential pressure between two pressures. It is a two-wire, 4-20 mA loop powered interface and can be powered from any source with a voltage range from 8 to 32 VDC. The device uses a combination of Piezoresistive and Capacitive elements to make the measurements, eliminating the need for calibration or adjustment. The device has a stainless steel body and is IP67 rated for protection against hazardous environments.The IPSLAT-A0500-5 has a high resolution analog output that can be used to measure pressure in increments as small as 0.01% of the Full Scale Range (FSR). It also has digital output capabilities for interfacing with digital control systems. The device has an internal temperature sensor that can be used to compensate for changes in ambient temperature.The IPSLAT-A0500-5 also has several safety features designed to protect against overpressure. It has a limit switch that will activate if the pressure increases to more than 10% above the FSR, and it also has a separate limit switch that will activate if the pressure drops to below 4% of the FSR. The device also has a pressure monitoring feature that can be used to monitor pressure levels in multiple zones.The IPSLAT-A0500-5 pressure sensor is suitable for a wide range of applications. It can be used in systems such as process control, boiler safety, pump control, air pressure monitoring, and many other industrial applications. The device is robust and reliable, providing accurate and reliable measurements with minimal maintenance or calibration.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description