ISL22446WFRT20Z-TK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital potentiometers are frequently used in applications that require precise control of an adjustable resistance for applications such as level setting or gain control. Digital potentiometers also have parts numbers or specification codes that allow users to select a part that best fits their application. The ISL22446WFRT20Z-TK is an example of a digital potentiometer with a relatively simple construction. It has three terminals: two input terminals and one output terminal. The two input terminals, called Vdd and Vss, act as a power supply to the potentiometer, while the output terminal, called W, is the output of the potentiometer and provides the adjustable resistance.

The ISL22446WFRT20Z-TK digital potentiometer is designed to work in a wide range of applications. It is designed to provide a wide range of adjustable resistance from 1kΩ to 37kΩ. The resistance can be adjusted through a simple 2-wire serial protocol. The potentiometer also has a low power consumption of 0.3mA or less at 2.5V. The potentiometer is housed in a small 8-pin MSOP/SOW package allowing it to be used in space-constrained designs.

The ISL22446WFRT20Z-TK is generally used in applications where the resistance needs to be precisely controlled, such as level setting or gain control. It can also be used to replace mechanical potentiometers in high temperature applications, since it can operate between -40°C to +85°C. It is also well-suited for use in automated testing and calibration, where very precise resistance values need to be obtained.

The working principle of the ISL22446WFRT20Z-TK involves a combination of digital and analog technologies. At its most basic level, the potentiometer is merely a resistor divider network, with each resistor representing a different digital value. The two input terminals, Vdd and Vss, provide a voltage source to the network. The output terminal, W, is then connected to an analog-to-digital converter (ADC) that converts the divided voltage into a digital code. This digital code is sent to a register inside the potentiometer. The register then stores the digital code and the associated resistance value is determined from the stored code using a look-up table.

The code stored in the internal register is then used to alter the current flow through the resistor divider network. This, in turn, changes the voltage output at the W terminal, which is then sent to the ADC for conversion into a digital code. This digital code is stored in the register, and the resistance of the potentiometer is updated accordingly. This process is repeated according to the desired resistance output until the desired resistance is obtained.

The ISL22446WFRT20Z-TK is a digital potentiometer with a wide range of applications. It has a simple construction with three terminals and can provide a wide range of adjustable resistance from 1kΩ to 37kΩ. The potentiometer is housed in a small 8-pin MSOP/SOW package and has low power consumption. It is commonly used for level setting and gain control, as well as automated testing and calibration. The working principle of the potentiometer involves a combination of digital and analog technologies, with a resistor divider network, a voltage source, and an analog-to-digital converter converting the divided voltage into a digital code. The digital code is sent to a register inside the potentiometer, and the resistance is then updated according to the code.

The specific data is subject to PDF, and the above content is for reference