ISL6151IB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuits (PMICs) are a specialized type of integrated circuit that manage, control, and optimize power utilization in any electronics device. Unlike regular integrated circuits, a PMIC consolidates multiple power-control functions into one integrated device, allowing for faster and more cost-effective designs. One type of PMIC is a Hot Swap Controller. A Hot Swap Controller is a specialized PMIC for handling the insertion and removal of live loads containing power, such as computer cards and monitors, without disruption or damage to adjacent circuit components.

The ISL6151IB is a Hot Swap Controller from Intersil Corporation that provides precise and robust overcurrent and overvoltage protection from live insertions and removals of power loads. This Hot Swap Controller uses a single-MOSFET structure and is optimized for 24V systems and circuits up to 30A in current. The ISL6151IB utilizes precise constant-current detection and sensing, reducing the risk of system damage or destruction in the event of an overload or short circuit.

The ISL6151IB can be used for a variety of applications, including high-current bus voltage regulation for distributed memory systems, power-management system power switches, and power-distribution systems. It can also be used to control the insertion and removal of peripheral cards connected to the computer’s system board, such as sound cards, video cards, or network cards. It can also be used to control the insertion and removal of power supplies, controllers, and solid-state drives.

The ISL6151IB features a wide input voltage range of 4.5V to 72V and a low total gate charge of 4nC (typical). It also features an operating quiescent current of 120uA (typical) and a maximum turn-on delay time of 100ns (typical). The ISL6151IB also offers an overvoltage shutoff range of 19V to 80V and an overcurrent shutoff range of 5A to 45A.

The working principle of the ISL6151IB is based on sensing current through a MOSFET. During normal system operation, the controller continuously monitors for any overcurrent or overvoltage conditions. If an overload or short circuit is detected, the controller quickly shuts off power to the load and keeps it shut off until manual reset under safe operating conditions.

The ISL6151IB also offers many safety features, such as inrush current limiting, hot swap sequencing, and thermal foldback. The inrush current limiting feature reduces inrush current to the load when it is connected, while the hot swap sequencing feature enables the controller to properly sequence the power up and power down of loads. Lastly, the thermal foldback feature limits the controller’s output current when it gets too hot to ensure safe operation.

Overall, the ISL6151IB is an ideal Hot Swap Controller for use in a variety of applications, including high-current bus voltage regulation, power-distribution systems, and peripheral card insertion and removal. It features precise constant-current detection and sensing, a wide input voltage range, a low total gate charge, an operating quiescent current, an overvoltage shutoff range, and an overcurrent shutoff range. It also offers many safety features, including inrush current limiting, hot swap sequencing, and thermal foldback.

The specific data is subject to PDF, and the above content is for reference