Allicdata Part #: | 1564-1033-ND |
Manufacturer Part#: |
IW1830-EVAL1 |
Price: | $ 70.51 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Dialog Semiconductor GmbH |
Short Description: | EVB 15W SINGLE-OUTPUT PWR SUPPLY |
More Detail: | iW1830-00 - AC/DC, Primary Side 1, Isolated Output... |
DataSheet: | IW1830-EVAL1 Datasheet/PDF |
Quantity: | 25 |
1 +: | $ 63.45990 |
Series: | -- |
Part Status: | Active |
Main Purpose: | AC/DC, Primary Side |
Outputs and Type: | 1, Isolated |
Power - Output: | 15W |
Voltage - Output: | 5V |
Current - Output: | 3A |
Voltage - Input: | 90 ~ 264 VAC |
Regulator Topology: | Flyback |
Frequency - Switching: | 72kHz |
Board Type: | Fully Populated |
Supplied Contents: | Board(s) |
Utilized IC / Part: | iW1830-00 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The IW1830-EVAL1 is an evaluation board and DC/DC or AC/DC (Off-Line) SMPS (Switch Mode Power Supply) that provides the designer of power supply a low-cost platform to experiment with a variety of power requirements that are higher than 5 Watts. The IW1830-EVAL1 comes with a user-friendly graphical user interface (GUI) for the control and configuration of the power supply. It can also be used to evaluate the performance of the switching regulator and used to evaluate the suitability of the particular power solution for different applications.
The IW1830-EVAL1 is an excellent choice for both beginners and experienced designers and engineers in the power electronics industry. The high efficiency level allows for a high degree of efficiency and low total cost of ownership. The board can also be used to measure the unregulated input voltage, output voltage and load current values. The board has two on-board isolated 4 mm banana sockets for all measurements.
The purpose of the IW1830-EVAL1 is to provide a platform for users and evaluators to practice power conversion design. The board is also suitable for high frequency converter design experiments and evaluation tests. The IW1830-EVAL1 offers overvoltage protection, temperature protection and current output auto-protection capabilities to ensure the converter\'s safe and reliable operation. The on-board power components are current limited to prevent accidental injury due to over-current. In addition, the board has a reset switch that can be used to simply reset the converter without having to disconnect the power.
The operating principle of the IW1830-EVAL1 board is based on a DC-DC converter design. The converter uses power components such as inductors, capacitors and transformers to step down the input voltage to the desired output voltage. The on-board switching circuit then modulates the power components to achieve the specified output voltage and load current. By controlling the duty cycle of the pulse width modulation (PWM) signal, the output voltage and current can be regulated. The IW1830-EVAL1 can then be used to regulate the output voltage and current to an accuracy of ±0.3%.
The application fields of the IW1830-EVAL1 are vast and can be used in a variety of different situations. The evaluation board can be used to develop and evaluate low power converters for applications such as medical equipment, consumer electronics, automotive, industrial and many more. It can also be used to correctly design the power supply circuit and verify the performance of the switching regulator, while also measuring the current and power output of the converter. It can also be used to test the performance and stability of off-line switching regulators with various maximum power outputs.
The IW1830-EVAL1 evaluation board is a highly reliable and convenient platform for testing, developing and evaluating power supply designs. The board is also suitable for quickly verifying the performance of switching regulators and power solutions for many different applications. The user-friendly GUI allows users to quickly set up the boards parameters and measure the power output and parameters required for the particular application. The high efficiency of the board ensures a low total cost of ownership and significantly reduces the time required to develop and evaluate power supply designs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
IW1812A105R-K0 | Laird-Signal... | 0.0 $ | 1000 | FIXED IND 1MH SMD1mH Unsh... |
IW1816-20-SO7 | Dialog Semic... | 0.22 $ | 1000 | AC/DC CONTROLLER INT PWR ... |
IW1830-01 | Dialog Semic... | 0.37 $ | 1000 | AC/DC CONTROLLER INT PWR ... |
IW1818-00 | Dialog Semic... | 0.62 $ | 903 | AC/DC CONTROLLER INT PWR ... |
IW1830-00 | Dialog Semic... | 0.87 $ | 769 | AC/DC CONTROLLER INT PWR ... |
IW1818-EVAL | Dialog Semic... | 71.4 $ | 35 | EVB 10W SINGLE-OUTPUT PWR... |
IW1830-EVAL | Dialog Semic... | 74.08 $ | 26 | EVB 15W DUAL-OUTPUT PWR S... |
IW1830-EVAL1 | Dialog Semic... | 70.51 $ | 25 | EVB 15W SINGLE-OUTPUT PWR... |
EVAL KIT FOR ACT4060ASH-TACT4060A - DC/D...
BOARD EVAL OFFLINE CTLR NCP1337ANCP1337 ...
BOARD EVAL POE FOR SI3402Si3402 - Specia...
EVAL BOARD FOR DCM24AP150T320A50DCM24AP1...
BOARD EVALUATION LM3670MF-1.5LM3670 - DC...
EVAL BOARD QUASI RES 15WVIPER35HD - AC/D...