Allicdata Part #: | J0011D11NL-ND |
Manufacturer Part#: |
J0011D11NL |
Price: | $ 3.62 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Pulse Electronics Network |
Short Description: | CONN MAGJACK 1PORT 100 BASE-TX |
More Detail: | 1 Port RJ45 Magjack Connector Through Hole 10/100 ... |
DataSheet: | J0011D11NL Datasheet/PDF |
Quantity: | 1000 |
360 +: | $ 3.28691 |
Series: | PULSEJACK™ J0 |
Packaging: | Tube |
Part Status: | Active |
Connector Type: | RJ45 |
Number of Ports: | 1 |
Number of Rows: | 1 |
Applications: | 10/100 Base-TX, AutoMDIX |
Mounting Type: | Through Hole |
Orientation: | 90° Angle (Right) |
Termination: | Solder |
Height Above Board: | 0.535" (13.59mm) |
LED Color: | Does Not Contain LED |
Number of Cores per Jack: | 4 |
Shielding: | Shielded, EMI Finger |
Features: | Board Guide |
Tab Direction: | Down |
Contact Material: | Phosphor Bronze |
Contact Finish: | Gold |
Operating Temperature: | 0°C ~ 70°C |
Contact Finish Thickness: | 15.0µin (0.38µm) |
Shield Material: | Brass |
Housing Material: | Thermoplastic |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Modular connectors - jacks with magnetics include J0011D11NL. This type of connector is specifically designed for use in communicating and exchanging data between two systems. It is commonly used in Ethernet networks to provide an EtherNet interface between systems.
The main purpose of the J0011D11NL is to provide a reliable connection to a network and to facilitate the simultaneous transmission and reception of information over the link. It is designed to maximize performance while maintaining a low power consumption. It is also designed to accommodate a wide range of network speeds, allowing for greater flexibility in how the system communicates.
The J0011D11NL connector utilizes a unique system of magnetics to ensure that the signal is securely transmitted from one device to the other. Instead of relying on an EMI shield or ground wire, this system relies on magnetics to provide the necessary signal shielding and reduction of crosstalk. This makes it ideal for use in high-speed applications such as Ethernet.
The main components of the J0011D11NL include the main connector, a magnetics module, a power supply module, and a backplane. The connector and power supply module are the two components that are visible at the front end of the unit, while the magnetics and backplane are located within the unit. These components all work together to provide an efficient, reliable connection.
The main connector and the power supply module are usually made of a combination of copper and plastic. Copper is used to minimize electrical cross-talk, while plastic is used to reduce resistive losses. The main connector also contains a shielding system in order to protect against crosstalk.
The magnetics module is responsible for providing the necessary shielding and protection against crosstalk. This module is composed of a series of resistors and capacitors. These components are wired in parallel and form a shield that prevents electromagnetic interference from entering the system.
The power supply module is responsible for providing the power necessary to operate the system. It is responsible for generating and regulating the voltages and currents that are needed to provide the power required to run the system. The power supply is usually connected to a wall outlet or a power supply board.
The backplane is responsible for connecting the components of the system and for providing the necessary pathways for data to travel between them. It contains a series of metal traces that are used to connect the various components. These traces enable data to flow between the components without being interfered with by outside sources.
The J0011D11NL connector provides a reliable connection that is needed for communication and data exchange among systems. It is designed to handle a variety of network speeds and offers an efficient, reliable connection. It also utilizes a unique system of magnetics to protect against crosstalk and ensure that the signal is securely transmitted from one device to the other.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
HLMP-6405-J0011 | Broadcom Lim... | -- | 1500 | LED YELLOW CLEAR 2SMD GWY... |
J0011D21NL | Pulse Electr... | -- | 1506 | CONN MAGJACK 1PORT 100 BA... |
J0011D01BNL | Pulse Electr... | -- | 5928 | CONN MAGJACK 1PORT 100 BA... |
J0011D21BNL | Pulse Electr... | -- | 504 | CONN MAGJACK 1PORT 100 BA... |
J0011D01NL | Pulse Electr... | -- | 663 | CONN MAGJACK 1PORT 100 BA... |
J0018D21ENL | Pulse Electr... | 5.54 $ | 811 | CONN MAGJACK 1PORT 100 BA... |
J0012D21NL | Pulse Electr... | 4.64 $ | 682 | CONN MAGJACK 1PORT 100 BA... |
J0018D21NL | Pulse Electr... | 5.31 $ | 350 | CONN MAGJACK 1PORT 100 BA... |
J0011D21ENL | Pulse Electr... | 5.49 $ | 950 | CONN MAGJACK 1PORT 100 BA... |
J0011D21 | Pulse Electr... | 0.0 $ | 1000 | CONN MAGJACK 1PORT 100 BA... |
J0011D01 | Pulse Electr... | 0.0 $ | 1000 | CONN MAGJACK 1PORT 100 BA... |
J0011D01B | Pulse Electr... | 0.0 $ | 1000 | CONN PULSEJACK 1PORT 10/1... |
J0011D21E | Pulse Electr... | 0.0 $ | 1000 | CONN MAGJACK 1PORT 100 BA... |
J0012D21 | Pulse Electr... | 0.0 $ | 1000 | CONN MAGJACK 1PORT 100 BA... |
J0010D11NL | Pulse Electr... | 0.0 $ | 1000 | CONN PULSEJACK 1X1 TAB DO... |
J0011D11NL | Pulse Electr... | 3.62 $ | 1000 | CONN MAGJACK 1PORT 100 BA... |
10130182-J0017YYLF | Amphenol FCI | 15.71 $ | 1000 | SATA PLUG |
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 12PORT 1000 BASE-TX12 Port ...
CONN MAGJACK 12PORT 100 BASE-TX12 Port R...