J113

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

J113 is a field-effect transistor (FET), more specifically a junction gate field-effect transistor (JFET), which belongs to the family of FETs, a type of transistor. It has three pins, a drain, a source and a gate. In this article we will be looking at the application field of J113 and its working principle.

J113 Application Field

The J113 is mainly used as a low-noise amplifier, a voltage regulator, and for analogue switch applications. Due to its symmetrical transfer curves of the drain-to-source voltage, the J113 is well suited for use in audio circuits, for pre-amplifiers and as a driver for headphones. Its high input impedance makes it suitable for attenuation applications.The J113 is commonly used in consumer electronics in the form of integrated circuits and transistors, for example playing a part in television sets, remote control units and game consoles, whereas the discrete application of J113 transistors is mainly used by hobbyists and in professional audio equipment.

J113 Working Principle

A JFET is formed by a channel of semiconductor material between source and drain. This channel is connected to the gate electrode. The width of the channel controls the flow of current and the voltage applied to the gate controls the bias voltage, this is known as a voltage divider bias. In a JFET, the gate and the channel form a diode junction. When the gate voltage is set below the voltage of the source, a reverse biased diode between source and gate will be activated. The reverse bias diode turns off the channel, preventing the current flow. When the gate voltage is raised and set above the source voltage, the diode junction turns off, allowing the current to flow through the channel.The JFET is operated in the region between the pinch-off point (where the current is reduced to zero) and the back-to-back diode point (where the gate voltage is equal to the source voltage). The pinch-off point and the back-to-back diode point on the drain-source characteristic graph represent the maximum and minimum current, respectively, and determine the operating area of the JFET. The gate voltage can be used to adjust the current flowing between source and drain.

Conclusion

The J113 is an N-channel junction-gate field-effect transistor. It has three pins, a drain, a source, and a gate. It is used for low-noise amplification, voltage regulation, and analogue switch applications. It is commonly used in consumer electronics in the form of integrated circuits and transistors.The J113 works by using a reverse-biased diode between the source and gate to control the flow of current through the channel. The gate voltage is used to adjust the current flowing between source and drain, and the operating area is determined by the pinch-off point and the back-to-back diode point on the drain-source characteristics graph.

The specific data is subject to PDF, and the above content is for reference