J7KNG-22-01 24D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays are a type of switch designed to electrically isolate two circuits. The J7KNG-22-01 24D relay is an industrial grade, 3PDT (3-pole double-throw) contactor. These contactors are used in an array of applications, from home automation to energy management. Their working principle is simple, yet effective; controlled by an input voltage, current or signal (depending on the model), these devices can control the flow of electricity in order to turn on/off a larger load, activate an alarm, etc.

In terms of contact ratings, the J7KNG-22-01 24D relay’s contact ratings are 20 A at 250VAC/30VDC, with a 5 A inrush current rating. Its coil resistance impedance is 14 Ohms, and its inductive voltage rating is rated at 700VAC. Needless to say, this relay is designed for loads that exceed 2 Amps.

The most common application for the J7KNG-22-01 24D relay is in motor control applications. In this setup, the relay is used to control the on/off flow of power to the motor. When the relay receives an input signal, it will open/close the contacts of the relay. This has the effect of either connecting or disconnecting the motor to the power source. The primary benefit of using a relay is that it allows for remote control of the motor without putting extra strain on the original power source.

In addition to motor control, the J7KNG-22-01 24D relay can be used in switching applications. This could involve switching between two circuits, such as in a home automation setup. Whether it be lighting, heating, air conditioning, etc., the relay allows for reliable switching between the two circuits, eliminating any potential issues that might arise with hard-wiring.

The J7KNG-22-01 24D relay can also be used for energy management. This is accomplished by placing the device between a power source and an energy intensive load. By controlling the on/off flow of power to the load, it is possible to limit the energy used, thus leading to reduced energy costs.

Finally, the J7KNG-22-01 24D relay can be used in alarm applications. By connecting the relay to a circuit, it is possible to detect when the circuit is open/closed. If the circuit is opened, the relay will open its contact points, activating the alarm. This is commonly used in intruder detection systems.

In summary, the J7KNG-22-01 24D relay is a multi-purpose, heavy-duty contactor designed for applications and loads that exceed 2 Amps. Its primary uses are in motor control, switching, energy management, and alarm detection applications. With its reliable operation and long service life, it is a cost-effective solution for controlling and managing the flow of power.

The specific data is subject to PDF, and the above content is for reference