JANTX1N4132D-1

Series:	Military, MIL-PRF-19500/435
Packaging:	Bulk
Part Status:	Active
Voltage - Zener (Nom) (Vz):	82V
Tolerance:	±1%
Power - Max:	500mW
Impedance (Max) (Zzt):	800 Ohms
Current - Reverse Leakage @ Vr:	10nA @ 62.4V
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 200mA
Operating Temperature:	-65°C ~ 175°C
Mounting Type:	Through Hole
Package / Case:	DO-204AH, DO-35, Axial
Supplier Device Package:	DO-35 (DO-204AH)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

A diode is an electronic component whose primary function is to allow current to flow through it in only one direction. A zener diode is actually a special type of diode that can conduct in reverse direction when a certain voltage is applied in the same direction. Zener diodes are used in many applications including voltage regulation, signal conditioning, waveform clipping, noise reduction and more. The JANTX1N4132D-1 is a single zener diode. This part is used in a variety of applications and is capable of handling high voltages and currents. The JANTX1N4132D-1 is a zener diode with an operating voltage of 3.3V at a 10mA current. It is encapsulated in a small, transparent, epoxy package with a diameter of just 0.12 inches (3 mm). This makes it suitable for surface mount applications where space is at a premium. In addition to its small size, the JANTX1N4132D-1 also has a high power dissipation rating of 150mW and a peak reverse voltage of 5.6V. The working principle of the JANTX1N4132D-1 is the same as all other zener diodes. When a voltage is applied in the reverse direction (according to the diode’s markings) the diode will start to conduct current. As the voltage increases, the current through the diode will increase until it reaches a certain point (known as the zener voltage). At that point, the diode will become a voltage reference, allowing a fixed voltage across it. This is the most common way to use zener diodes, as they provide a reliable and stable voltage reference.The JANTX1N4132D-1 is primarily used in voltage regulators, where it is used to regulate the output voltage of a power source. It is also used in signal conditioning and waveform clipping circuits, as well as for noise reduction and overvoltage protection. It is also sometimes used as a voltage reference to isolate two circuits from one another. The JANTX1N4132D-1 has other applications as well, such as temperature compensated bias circuits, amplifier bias circuits and low-power load switch circuits. The JANTX1N4132D-1 is an incredibly versatile and reliable part, offering a wide range of uses for various applications. Its small size package and high power handling capabilities make it well suited to many applications, while its stable and reliable voltage reference ensures that it provides consistent quality results in all applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description