JANTX1N4476

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JANTX1N4476 is a diode that can be categorized as a Zener Single type. It is used in many applications, the main function of which is voltage regulation in order for a steady output voltage to be maintained. This device is also used in the protection of circuits, preventing current flow of too large magnitude, and to limit voltage spikes. It can also be used to clamp input signals as needed.

The JANTX1N4476 is a two terminal device with a maximum rated maximum zener voltage of 47 volts. The zener voltage is the voltage at which the voltage across the diode drops dramatically due to the increased resistance of the junction, allowing a constant voltage to be maintained. The device is designed to operate up to 1A, and it has a maximum power dissipation of 600mW.

The diode is made of a N-type silicon body with heavily doped P-type regions at the main junction. This creates a gradual breakdown of the electric field as the voltage increases. The voltage at which the breakdown occurs is calibrated to be a certain value and is called the Zener Voltage. When the voltage applied to the device reaches this Zener Voltage, its resistance decreases drastically, enabling it to offer a constant voltage at its terminals. This is what allows it to regulate or control the output voltage during the operation.

As far as the applications of the JANTX1N4476 goes, this diode is mainly used in voltage regulation circuits. It is mainly used in a circuit as a voltage regulating reference as well as in a voltage divider network. The exact application depends on the exact input and output requirements of the system. In voltage regulation circuits, a voltage is taken from the input supply and applied to the diode, the output of which is then provided to the system. The diode helps to maintain this output voltage, regardless of changes in the input voltage.

The JANTX1N4476 is also used to prevent damage to circuits due to transient voltages or current surges. It can also be used as a current limiter by safely limiting the amount of current that will flow through it during operation. Additionally, it can be used to clamp input signals in order to avoid any over-voltage situation or undesired operations.

In conclusion, the JANTX1N4476 is a single Zener diode which is mainly used for voltage regulation, current limiting, and signal clamping. It has a maximum zener voltage of 47 volts and can operate up to 1 Aber er. The device consists of a N-Type silicon body with heavily doped P-type regions at the main junction, which is responsible for the gradual decrease in resistance and the maintenance of a constant voltage.

The specific data is subject to PDF, and the above content is for reference