JANTX1N4583A-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a common type of electrical component found in most electronics. They have two terminals, an anode and a cathode, and operate by allowing current to flow through them in only one direction. They are used in circuits for rectification, filtering, voltage regulation, and current regulation. Zener diodes are a type of diode that is designed to allow current to flow in the reverse direction when a certain threshold voltage is exceeded, known as the Zener voltage. This process is known as Zener breakdown. The JANTX1N4583A-1 diode is a type of single Zener diode, which can be used in various applications and devices.

JANTX1N4583A-1 is a 200mW Zener diode operating from -55°C to +150°C, with a peak reverse power rating of 500mW. It has a reverse breakdown voltage (Zener voltage) of 4.8V, and is made with an alloy junction for good stability. It is rated for a maximum reverse current of 5 mA, and a maximum Zener impedance of 540 ohms. The diode is made with a glass body and is suitable for use in low power applications.

JANTX1N4583A-1 diodes can be used in various applications. One of the most common uses is as a voltage regulator. By connecting the anode and cathode of the diode to a voltage source, the voltage at the anode of the diode is maintained at the Zener voltage of 4.8V. This is because the diode will only allow current to flow in the reverse direction when the voltage at the anode exceeds the Zener voltage, causing Zener breakdown. This Zener breakdown limits the amount of current that can flow in the reverse direction, so the voltage at the anode is maintained at the Zener voltage.

Additionally, JANTX1N4583A-1 diodes can be used for voltage clamping. By connecting the anode and cathode of the diode to a voltage source, the voltage at the anode is maintained up to a certain level. If a voltage spike occurs, causing the voltage at the anode to exceed the Zener voltage, the diode will cause the voltage to drop back to the Zener voltage, protecting the circuit from the effects of the voltage spike.

The JANTX1N4583A-1 diode can also be used for current regulation. By connecting the anode of the diode to a current source, the current will flow through the diode until the voltage at the anode reaches the Zener voltage. At that point, the current will be limited by the Zener effect, maintaining the current at the level required by the circuit.

Finally, JANTX1N4583A-1 diodes can be used in noise filtering applications. When connected across AC terminals, the diode will limit the amount of noise in the circuit by preventing high frequency noise from reaching the output terminals.

In conclusion, the JANTX1N4583A-1 diode is a type of single Zener diode which can be used in various applications such as voltage regulation, current regulation, and noise filtering. It has a reverse breakdown voltage of 4.8V, and is rated for a maximum reverse current of 5mA and a maximum Zener impedance of 540 ohms. The diode is made with a glass body and is suitable for use in low power applications.

The specific data is subject to PDF, and the above content is for reference