JANTX1N6642UB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JANTX1N6642UB diode is classified as part of the rectifier-single component family. As a component, rectifiers are invaluable for providing direct current (DC) from alternating current (AC). This rectifier is a unique component which enables DC conversion of AC, while featuring high blocking voltage and low forward current. The JANTX1N6642UB component is particularly useful for applications related to computers, mechanical, automotive and communications industries.

Functionally, the JANTX1N6642UB rectifier acts as an electrical switch to transfer current. This component mainly consists of an anode and a cathode. When a load is connected between the two, current will flow as long as the voltage applied is within the diode’s operation rating. When a user applies an external voltage, current will flow from the anode to the cathode. When the voltage applied proves too small to cause current flow, the diode remains off.

From a mechanical standpoint, the JANTX1N6642UB rectifier measures 2.79 millimeters in length, and is .30 millimeters in width. Mounting holes for the component measure .50 millimeters in size. This component weighs .0017 ounces, making it simple to install into equipment with minimal disturbance. Furthermore, the component’s simplicity makes it self-installing for certain projects.

In terms of operation, the JANTX1N6642UB component is rated to support blocking voltage of 250 volts up to a maximum of 1000 volts. This component can also handle direct current of 250 amperes measured in a range of 800 to 1000 volts. While the current only runs one way through this component, it is exceptionally efficient at handling strong currents. This rectifier can handle peak currents of 1350 amperes.

Commercially, JANTX1N6642UB rectifiers are used for a variety of purposes. Common uses for this component include the synchronization of AC signal waves and signal conversion. Since the diode can handle high power signal flows, it is also ideal for matching output with differentiating circuit applications. Furthermore, rectifiers are commonly used to reduce the power of inrush currents when switching on a device such as an air conditioner or microwave.

The JANTX1N6642UB router can also be used in source-formed applications. With source-formed applications, the diode works in tandem with a resistor to convert an input current of AC into a DC pulse. This process is known as rectification, and the router helps to reduce the resulting ripple of the converted AC signal.

Finally, JANTX1N6642UB rectifiers are also commonly used in overvoltage protection circuits. When used for this purpose, the router works to cap the output voltage at a certain level. If the input voltage on the circuit exceeds the protective level, the guardian diode will divert the extra electricity, protecting devices connected to the circuit from harm.

In conclusion, the JANTX1N6642UB is a rectifier-single component which converts AC to DC. This component is small and lightweight, making it easy to install in any device. Additionally, the JANTX1N6642UB rectifier is rated to handle a blocking voltage of up to 1000 volts and direct current of up to 250 amperes. This component is invaluable for providing safe, efficient power in prime applications such as signal and current matching, source-forming and overvoltage protection.

The specific data is subject to PDF, and the above content is for reference