JANTX1N938B-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a form of semiconductor that is used in order to control and manage the flow of electrical current. Zener diodes are a popular type of diode that are used for voltage regulation and regulation of current flow. The JANTX1N938B-1 is an example of a Zener diode.

The JANTX1N938B-1 is a single element, unidirectional 5.6 volt Zener diode. It is a diffusion-based device with a maximum power dissipation of 200 mW. The device has an operating temperature range ranging from -65°C to +175°C and a breakdown voltage ranging from 4.7 to 9 volts. The maximum surge current is specified at 4A, while the maximum reverse leakage current is 20 μA.

The JANTX1N938B-1 is commonly used in applications such as protection circuits, voltage clamping circuits and voltage regulating circuits. It is typically used in applications involving highly sensitive electronic systems that must be protected against overvoltage conditions, such as microprocessors, voltage references, and linear ICs. The device can also be used in transient suppression circuits, where it can limit the current that flows through the circuit in a transient event.

The JANTX1N938B-1 functions by allowing current to flow in only one direction. When the current applied to the device is greater than the rated breakdown voltage, the voltage drops across the device, protecting the circuit from overvoltage conditions. The voltage across the diode remains constant, until the current is greater than its rated power dissipation rating. At this point, the diode will begin to heat up and the current will be limited to the rated power dissipation rating to prevent the diode from being damaged.

In conclusion, the JANTX1N938B-1 is a single element, unidirectional 5.6V Zener diode. It is commonly used in applications such as protection circuits, voltage clamping circuits, and voltage regulating circuits. The device functions by allowing current to flow in only one direction, until the current is greater than the rated breakdown voltage. At this point, the voltage across the diode remains constant until the current is greater than its rated power dissipation rating. At this point, the diode will heat up and the current will be limited to the rated power dissipation rating to prevent it from being damaged.

The specific data is subject to PDF, and the above content is for reference