JANTXV1N4131DUR-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are one of the most widely used electronic components in today’s world. They are used in a variety of applications such as rectifiers, voltage regulators, and current limiting devices. They are also used in switching, level detection, and power management applications. The circuit diagram of a diode shows its basic structure, which consists of an anode and a cathode, connected by a semiconducting material.The JANTXV1N4131DUR-1 is a single Zener diode, classified under the Zener diode category. A Zener diode is a diode specifically designed to operate in the reverse bias operating mode, with the cathode being connected to the negative terminal and the anode to the positive terminal. The reverse bias mode causes a small current to flow from the cathode to the anode, which is known as the Zener current. In this mode, the diode is able to regulate a voltage, which is known as the Zener voltage.

The JANTXV1N4131DUR-1 is designed to produce a fixed reverse bias voltage of 4.1 V. This means that the diode will regulate any voltage that is applied across its terminals to the Zener voltage value, 4.1V. The diode is also designed to produce a maximum power dissipation of 1 W, which makes it suitable for a variety of applications.

The JANTXV1N4131DUR-1 can be used in a variety of applications, such as voltage regulation and overvoltage protection. In voltage regulation applications, the diode is connected in series with the load. The diode helps to maintain the voltage applied to the load at the desired level, by limiting the current that flows through it. In overvoltage protection applications, the diode is connected in parallel with the load. The diode helps to limit the current that flows through the load, in the event of an overload situation.

The working principle of the JANTXV1N4131DUR-1 is relatively simple. When the voltage applied to the terminal of the diode is lower than the reverse bias voltage, the diode remains OFF, allowing no current to flow through it. However, when the voltage is higher than the reverse bias voltage, the diode turns-ON, allowing a small current to flow through it, which helps to regulate the voltage across its terminals.

In conclusion, the JANTXV1N4131DUR-1 is a single Zener diode, which can be used in voltage regulation and overvoltage protection applications. It is designed to produce a reverse bias voltage of 4.1 V and a maximum power dissipation of 1 W. The working principle of the diode is based on its ability to turn-ON when the voltage applied to it is higher than the reverse bias voltage, allowing a small current to flow through it which helps to regulate the voltage.

The specific data is subject to PDF, and the above content is for reference