JANTXV1N6472 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient voltage suppression (TVS)diodes are a kind of special electronic components, which are often used to protect the system against undesired transients. The JANTXV1N6472 is a small two-pin axial diode used in TVS applications. Specifically, it is designed for bidirectional transient protection with low breakdown voltage, low leakage current, and low capacitance. This article will first discuss the JANTXV1N6472’s application field, followed by a description of its working principle.

Application Field

The JANTXV1N6472 is a widely used model of TVS diode. It is used for bidirectional protection in systems such as communication, consumer electronics, computers, and industrial automation. The diode limits the voltage transients on two-pin systems where transient voltages can reach levels that may cause permanent damage or data loss. Due to its wide application field, it is important for engineers to take into account the field\'s specific requirements when designing the configuration of the diode.

Working Principle

The JANTXV1N6472 is a two-pin TVS diode. When the transient voltage is below the breakdown voltage, the diode circuit is open, thus allowing the diode to pass current. When the transient voltage is above the breakdown voltage, the diode circuit will close, and the voltage will be limited. At the same time, the diode will draw power from the external source to absorb the energy during the transient. This will control the peak voltage of the circuit, thus protecting the system from damage or data loss.

In addition to the limit on the peak voltage, the JANTXV1N6472 also limits the current passing through the circuit. When the transient voltage is higher than the breakdown voltage, the circuit will attempt to draw more current than the maximum peak current rating of the diode. When this happens, the diode will absorb the excess current, thus preventing the current from reaching dangerous levels and damaging the system.

Apart from its transient voltage and current limitation capabilities, the JANTXV1N6472 also has high reverse bias breakdown voltage, which is important for bidirectional protection. The reverse bias breakdown voltage is the maximum voltage that can be applied to the diode in the reverse direction before the diode starts to conduct current. The diode can thus protect the system from large reverse bias voltages that could potentially damage the circuit.

The JANTXV1N6472 is a robust TVS diode with a wide array of applications. It can be used to protect two-pin systems from transient voltages and to limit the peak voltage and current of the circuit, thus preventing system damage or data loss. It is a viable protection solution for a variety of applications, including communication, consumer electronics, computers, and industrial automation.

The specific data is subject to PDF, and the above content is for reference