JANTXV1N6623US

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components with the purpose of allowing electrical current to flow in one direction while blocking it from backwards flow in another. Among these components, rectifier diodes provide a way to direct AC current with a unidirectional current flow, thus allowing the desired electrical signal to pass through. The JANTXV1N6623US is a notable single rectifier diode that is used in varying applications requiring rectification. This article will explore what the JANTXV1N6623US is used for and how it works.

Applications

The JANTXV1N6623US is used for two separate common applications, namely TVS Diode Protection and High-Speed Switching. The component is designed for protection from transient voltage surges (TVS) and from high-frequency applications such as RF signal switching.

For TVS diode protection, the component acts as a component designed to supply an easily-dismissed amount of energy into the electronic circuit in order to act as a buffer when a high-energy transient pulse comes its away. This prevents the overload that might otherwise damage the delicate underlying electronics.

In the case of high-speed switching, the component is used in RF signal switching applications where micro-second switching times are required in order to maintain high enough signal integrity. This component is able to achieve that with consistent results.

Electrical Properties

The JANTXV1N6623US is a single rectifier diode that is rated for general purpose networks up to 10A. The component has a Cathode Capacitance of 1.4pF and a Reverse Recovery Time of 500ns. The maximum reverse leakage current is 5µA and the maximum reverse Voltage is 200V. The component has an operating temperature range of -55°C to +150°C.

The component also has a clamping voltage of 339V, making it suitable for use in circuits subject to high-energy transients. This provides the additional protection that is necessary for high-frequency circuits.

Package and Mounting

The JANTXV1N6623US package is comprised of a surface mount (SMT) package type, meaning that it is capable of being mounted on a circuit board for extended period of reliability. The case size is 2.4mm x 1.4mm x 0.88mm, which is important for calculating the physical space required on the circuit board.

Working Principle

The JANTXV1N6623US is a single rectifier diode, and therefore relies upon the same basic design principles as other single diodes. The component is designed with an anode and a cathode, as well as a semi-conductor material in between the two in order to allow current to flow in one direction and not in the other. This gives the diode the unidirectional current property, which is required for rectification.

The component is also designed with the ability to clamp voltage. This means that it is able to form a low-impedance path to ground when the voltage reaches a certain point, thus protecting the underlying electronics from overload damage. This property is further augmented in the JANTXV1N6623US due to its high clamping voltage, which is greater than in most other diodes as it is designed for use in high-energy circuits.

Conclusion

The JANTXV1N6623US is a single rectifier diode designed for applications requiring the rectification of AC current, as well as for use in high-speed switching applications. The component is capable of providing voltage clamping for additional protection from transient voltage surges, due to its high clamping voltage of 339V. The JANTXV1N6623US is rated for up to 10A of current and an operating temperature range of -55°C to +150°C, making it suitable for many electronic circuits.

The specific data is subject to PDF, and the above content is for reference