Allicdata Part #: | JTS393C-1AA5-ND |
Manufacturer Part#: |
JTS393C-1AA5 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC COMPARATOR DUAL MCRPWR |
More Detail: | Comparator CMOS CMOS Wafer |
DataSheet: | JTS393C-1AA5 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Type: | CMOS |
Number of Elements: | 2 |
Output Type: | CMOS |
Voltage - Supply, Single/Dual (±): | 2.7 V ~ 16 V, ±1.35 V ~ 8 V |
Voltage - Input Offset (Max): | 5mV |
Current - Input Bias (Max): | 600pA |
Current - Output (Typ): | 2nA |
Current - Quiescent (Max): | 20µA |
CMRR, PSRR (Typ): | 71dB CMRR, 80dB PSRR |
Propagation Delay (Max): | -- |
Hysteresis: | -- |
Operating Temperature: | 0°C ~ 70°C |
Package / Case: | Die |
Supplier Device Package: | Wafer |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
JTS393C-1AA5 is classified as a Linear-Comparator, which is a type of linear analog circuit that has two operating modes; one being a regulator mode, and the other being an op-amp mode. The comparator is used to compare two different sets of inputs and produces outputs accordingly. This circuit can be used in a wide range of applications, and is often seen in switchgear and process controllers.
The JTS393C-1AA5 is a four-terminal comparator which consists of two operational amplifiers, a differential amplifier, and a pull-up transistor. This configuration allows the comparator to maintain the same output voltage for a set range of input voltages (i.e. the trigger voltage). The two operational amplifiers control the voltage at the negative and positive input terminals respectively. When the input voltage at either of these terminals exceeds the trigger voltage, the output will change from it\'s present state; either from high to low or low to high. This allows the chip to act as both a regulator and an op-amp.
The comparator can also be used in motor control applications. When used this way, the comparator can be used to detect when the motor speed has reached a certain point, and then activate an appropriate control circuit. This in turn can control or limit the amount of current flowing through the motor.
JTS393C-1AA5 can also be used to monitor system temperatures. It can sense when the temperature rises above a certain point, and then trigger an appropriate alarm. The comparator is also used to detect faults in electrical systems, and can be used to detect when a current is too high or low. This application is very useful for safety conscious applications, such as in automotive and aerospace engineering.
The JTS393C-1AA5 is a very versatile chip and its applications are endless. Its linear characteristics and precise voltage regulation make it a go-to device for many operators.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
JTS393C-1AA5 | STMicroelect... | 0.0 $ | 1000 | IC COMPARATOR DUAL MCRPWR... |
IC COMPARATOR QUAD 16SOICComparator with...
IC COMPARATOR REF P-P SC70-5Comparator G...
IC COMPARATOR DUAL ECL 20-PLCCComparator...
IC COMP SNGL 4NS ULTRFAST 8-MSOPComparat...
IC COMPARATOR RSCML 16QFNComparator Gene...
IC COMP DUAL LOW PWR W/REF 8SOICComparat...