JTV1S-PA-12V

Turn On Voltage (Max):	9 VDC
Coil Resistance:	144 Ohms
Coil Power:	1 W
Contact Material:	Silver Tin Oxide (AgSnO)
Operating Temperature:	-55°C ~ 85°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Fully
Release Time:	10ms
Operate Time:	15ms
Turn Off Voltage (Min):	1.2 VDC
Series:	JT-V
Switching Voltage:	277VAC - Max
Contact Rating (Current):	20A
Contact Form:	SPST-NO (1 Form A)
Coil Voltage:	12VDC
Coil Current:	83.3mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

The JTV1S-PA-12V is a device that falls under this power relays category. It is used to protect devices from overcurrent and short-circuit faults caused by an external circuit. This model is designed to provide increased levels of protection and functionality.The JTV1S-PA-12V is used as a safety circuit in sensitive electronics. It is designed for loads up to 12 volts, which can include small motors and solenoids, as well as other analog and digital circuits. It can be used to control both AC and DC loads of up to 2 amps.It is a single-in-line package (SIP) with 6 pins protruding from the top. At the center of the package is the sensing resistor. This resistor has a resistance of 39.2Ω and is used to detect the current being drawn by the load. The remaining five pins are used to provide input/output connections and power to the device. The JTV1S-PA-12V is an electromechanical device that acts as a switch on current. When the current exceeds the set level, a pulse is sent to the triac, which activates it. This activates the switch and interrupts the circuit. The switch then opens and the current stops flowing. When the current falls below the set level, the switch closes and the circuit is restored.The JTV1S-PA-12V can be used to protect loads from excessive currents, short-circuits, and other pitfalls. It can detect an overcurrent or short-circuit and trip the switch, thus protecting the load. It will also shut off the load if the current drawn exceeds the maximum allowed current. The device is also designed to provide overload and short-circuit protection for a variety of equipment. This protection helps to ensure the safety of the equipment and the user. The device is capable of protecting loads up to 12 volts and has a response time of less than 2 msec. The device is capable of multiple trips if the current exceeds the limit multiple times in a row.The JTV1S-PA-12V can be used in a relatively simple, yet reliable design. It is an efficient and reliable device that provides good protection for loads. This device is a safe and secure way to protect circuits and equipment from the adverse effects of overcurrent and short-circuit faults.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description