JW2ASN-DC6V

Turn On Voltage (Max):	4.2 VDC
Coil Resistance:	68 Ohms
Coil Power:	530 mW
Contact Material:	Silver Nickel (AgNi)
Operating Temperature:	-40°C ~ 60°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Fully
Release Time:	5ms
Operate Time:	15ms
Turn Off Voltage (Min):	0.6 VDC
Series:	JW
Switching Voltage:	250VAC, 30VDC - Max
Contact Rating (Current):	5A
Contact Form:	DPST-NO (2 Form A)
Coil Voltage:	6VDC
Coil Current:	88.0mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JW2ASN-DC6V is an electronically protected relay with an insulation voltage of 6,000 VAC, or 4,000 VDC. It is designed to control low voltage electrical circuits up to 16 amperes or 600 watts. This device belongs to the category of power relays, over 2 amperes.The JW2ASN-DC6V is often used in automotive, industrial and renewable energy applications. It is a commonly used control solution for motor control, power conversion and other applications where reliable and accurate switching of currents is required.The relay consists of a contact block, a power rating control circuit, an electronic circuit, and a protection circuit. All components are integrated onto a single PCB. The contact block consists of two normally closed contacts that can be opened using a n/o type signal. The power rating control circuit is responsible for limiting the power rating down to the desired level. The electronic circuit is used to provide accurate switching of the relay contacts. The protection circuit is designed to protect the relay from damage in case of overvoltage or short circuit conditions.The JW2ASN-DC6V is designed to be able to handle an extreme range of operating voltages from -40 to +250V. The power rating control circuit limits the power to the desired level and the protection circuit protects the relay from damage in case of overvoltage or short circuit conditions.The JW2ASN-DC6V is designed to meet the strictest safety standards. The contact block and power rating control circuit are designed to meet UL508 and EN 60947-2 standards. The electronic circuit is RoHS2 compliant and has a low-power operation up to 100 kHz. The working principle of the JW2ASN-DC6V is based on the current and voltage sensing capabilities. The relay is designed to react accurately and quickly to the current and voltage levels present at the contacts. The electronic circuit senses the voltage and current levels at the contacts and determines the best course of action to take in order to maintain the desired power rating. If the current or voltage levels exceed the desired level, the relay will act accordingly and switch off the circuit to protect it from damage. The operating conditions for the JW2ASN-DC6V can vary depending on the application. The recommended operating temperature range is between -4 and +104°F (-20 and 40°C), with a maximum relative humidity of 95%. The contact pressure should be between 0.3 and 0.9 Newton (3 and 9 kg capacity). The JW2ASN-DC6V has a mechanical life expectancy of 200,000 operations, and an electrical life expectancy of 60,000 operations.In sum, the JW2ASN-DC6V is an electronically protected relay with an insulation voltage of 6,000 VAC, or 4,000 VDC. It is designed to control low voltage electrical circuits up to 16 amperes or 600 watts. This device belongs to the category of power relays, over 2 amperes, and is often used in automotive, industrial and renewable energy applications. The operating conditions for the JW2ASN-DC6V can vary depending on the application, and its working principle is based on the current and voltage sensing capabilities. The relay is designed to react quickly and accurately to the current and voltage levels present at the contacts in order to maintain the desired power rating.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description