JWS7548/A Power Supplies - External/Internal (Off-Board)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC converters are used in a variety of applications, such as power supplies, motor drives, solid state relays, and consumer electronics. The JWS7548/A is an example of an AC DC converter. The JWS7548/A is a three-phase 48VAC/230VAC input, three-phase DC output converter with variable voltage output from 0-50VDC. It is designed to be used in motor control applications where a variable speed motor is required, or to provide a constant DC voltage to a load, or to condition input power from a variable AC voltage source.

The JWS7548/A is based on the advanced sine wave modulation technology and is optimized to produce low output ripple, low noise, high conversion efficiency and high power conversion ratio. It consists of a rectifier, converter, and regulator circuitry.

The rectifier converts the AC input waveform into a DC power supply to the converter and regulator circuitry. In the converter, an AC voltage is generated from a DC voltage via a sine wave modulator. The sine wave modulator takes a PWM (Pulse Width Modulated) signal and outputs a sine wave that is proportional to the PWM signal. The sine wave is then used to drive a synchronous motor. The frequency of the PWM signal is determined by the sine wave modulator, which is usually controlled by the converter’s internal oscillator. The regulator circuitry monitors the output voltage and adjusts the PWM signal accordingly to maintain the desired output voltage.

The JWS7548/A is designed for use in motor control applications and is suitable for use in AC/DC power supplies, UPS systems (Uninterruptible Power Systems), welding machines, and light loads. It is also suitable for conditioning input power from variable AC voltage sources. The JWS7548/A is designed for use in applications where low noise is required.

The JWS7548/A is capable of providing a wide range of DC powers from 0-50 volts. This power range can be used to drive DC loads such as motors, light bulbs, and injectors. Its wide voltage range allows it to be used in many industrial, engineering, and medical applications. Its high power conversion ratio makes it suitable for use in high-powered applications, providing a cost effective method of providing high-powered DC power.

The JWS7548/A also features over-voltage and over-current protection, which can limit current to a certain level if an overload occurs. Additionally, the JWS7548/A can be remotely controlled via control signals, which allow the user to adjust the output voltage and current without having to manually adjust the device.

Overall, the JWS7548/A is a highly efficient, low-noise, and cost effective AC DC converter designed for use in industrial, medical, and engineering applications. Its advanced sine wave modulation technology provides low ripple, high power conversion ratio, and remote control capabilities, making it suitable for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference