Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Modular Connectors - Jacks With Magnetics

The JXD1-0014NL is a modular connector that is designed to enable direct connection between standard RJ45 ethernet ports. It is specifically designed to reduce the amount of noise and electromagnetic interference (EMI) while providing a secure and reliable connection. The JXD1-0014NL is designed to operate over a wide temperature range with most applications requiring it to perform in temperatures between -40 and +75°C. The JXD1-0014NL features a right-angle, surface mountable design, and so is ideally suited for use in harsh environment applications.

The JXD1-0014NL is a jack with magnets, meaning that the connection between the two contacts is enhanced with the use of permanent magnets. The magnets are positioned in the contact block which connects the male and female contacts together. With two magnets arranged perpendicularly to each other, the force of attraction between the two is increased, thus providing a more stable connection and less noise, as the contact does not tend to bounce.

This connector is mainly used in data links or telephones for high speed digital communications, such as in cellular telephone communications, cable and satellite TV, and digital subscriber line (DSL) services. It is also used in military and medical applications. This connector is manufactured in accordance with the EIA/TIA-568A/B standard and is available in both Category 5e and Category 6 iterations.

The JXD1-0014NL can be used for both direct connection and crossover cable applications. The connector has eight standard pins inside, one shield and contact, and one magnet. It is designed to work with standard and shielded UTP cables, using an IDC (Insulation Displacement Connector) with 110 punch down connection style.

The working principle of this connector is as follows: When the magnet comes into contact with the wall of the connector, a crescent shaped indentation pushes the end of the wire strands into the hole provided in the contact plate to make the electrical connection to the Ethernet jack. The eight gold-plated pins then make contact with the Ethernet contacts, allowing an interconnection between them. To ensure good connection between the pins and the contact plates, the point of contact should be clean.

The JXD1-0014NL is designed to be reliable and secure, providing a reliable and secure connection for RJ45 Ethernet applications and high speed digital communication systems. With its rugged design, wide temperature range, and magnetics, it is an ideal choice for harsh environments.

The specific data is subject to PDF, and the above content is for reference