K62A741

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

K62A741 is a semiconductor integrated circuit from NXP Semiconductor. It is a single-chip low cost, low power, 16-bit microcontroller with built-in features such as 16-bit DMA, 32-bit timer/counter, and multiple digital I/O control. Being an efficient, low power device, the K62A741 is suitable for a wide variety of applications and system designs.

The K62A741 is ideally suited for a variety of applications such as industrial control, consumer electronics, automation, and medical equipment. It has a wide operating temperature range from -40°C to +85°C which allows it to house in extreme temperature environments. It operates at a maximum supply voltage of 3V3 and the processor core operates at a maximum speed of 16MHz.

The K62A741 is a 16-bit CMOS MCU for low-power applications. It consists of several components including an on-chip oscillator, two identical 16-bit CPU cores, 16 kB program memory, 1 kB data memory, 8 – 16 kB configurable EEPROM, 11 interrupts and associated 10 slice timer/counter. Additionally, it has features such as on-chip pull-up resistors, programmable input/output functions, programmable comparators, configurable external IRQ sources and 8/9/10/12-bit Analog-to-digital converter (ADC).

The K62A741 works with an internal clock that operates at the frequency of 16MHz or 32MHz (internal RC oscillator). This clock is used to fetch instructions from the internal program memory and for interrupt handling. The instructions are encoded using a four-by-four bit instruction pattern. The instruction set of this MCU contains the normal instructions which target the two CPU cores, the 8-bit and the 16-bit are the most commonly used. In addition to the standard instructions, the K62A741 contains special control instructions which are used to control certain peripherals, such as the ADC, timers, and analog-to-digital conversion.

The K62A741 offers a total of 11 interrupt sources. This allows for interrupt driven program executions and stack operations. It has both a hardware and software stack that consists of 11 bytes. The hardware stack is used to save the program counter, high and low PC, flags, and general-purpose registers. The software stack can be used to store multiple software stacks consisting of 8 bytes each.

The K62A741 is a versatile device that can be used to design systems with various configurations. It can be used to design systems with 3 different types of external memories. First, it supports the external memory for ROM, which can be configured up to 16 kB ROM. Second, it supports external SRAM, which can be used up to 8 kB of RAM. Lastly, it supports the external EEPROM which can be configured up to 8-16 kB of EEPROM. This makes the K62A741 suitable for applications that require low-power consumption and a wide range of external memories.

The K62A741 can interface with many external devices. It provides multiple I/O pins on the chip and has dedicated I2C, SPI, and UART that can be used to communicate with external devices. It supports a maximum of 56 I/O ports that can be configured as either inputs or outputs. The input pins can be driven by a pull-up resistor value from 2kΩ to 82kΩ. Additionally, the device supports multiple external interrupts, GPIOs, and a 10-bit ADC.

The K62A741 is an all-optional, low-power microcontroller device designed for low-power applications. This device can be used in a variety of applications and system designs, due to its wide operating temperature range, low-power operation, and wide selection of features. Although the K62A741 is available for a wide variety of applications, it is most optimum for industrial control, consumer electronics, automation, and medical equipment.

The specific data is subject to PDF, and the above content is for reference