Allicdata Part #: | Z9680-ND |
Manufacturer Part#: |
K8DS-PU1 |
Price: | $ 111.34 |
Product Category: | Industrial Controls |
Manufacturer: | Omron Automation and Safety |
Short Description: | 17.5 MM 3-PHASE VOLTAGE RELAY |
More Detail: | N/A |
DataSheet: | K8DS-PU1 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 101.21000 |
10 +: | $ 95.25600 |
25 +: | $ 92.27890 |
50 +: | $ 86.32540 |
Specifications
Series: | K8DS |
Part Status: | Active |
Type: | Phase Loss, Phase Sequence |
Trip Status: | -- |
Trip Range: | -- |
Delay Time: | 0.1 Sec ~ 30 Sec |
Voltage - Supply: | 200 ~ 240VAC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 5A @ 250VAC |
Mounting Type: | DIN Rail |
Operating Temperature: | -20°C ~ 60°C |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
K8DS-PU1 Application Field and Working Principle
K8DS-PU1 is a type of current/voltage/relay output monitoring device designed by the Voltaware Company. It is a single/dual voltage monitor designed to measure and monitor current, voltage and relay output.K8DS-PU1 consists of various components such as the front panel interface, a display module, a signal processor, a data acquisition system, and a circuit board. It is designed to measure, record and display both the current and voltage of a single or two-phase system. It is also designed to measure and record the output relay status, and provides a live output signal to indicate the output state.Application Field
K8DS-PU1 is used in many applications, including but not limited to: motor control, DC power line monitoring, automotive industries, power metering, and industrial automation. The device is designed to monitor, measure and record the current and voltage of a single or two-phase system, and to monitor and record the output relay status.Working Principle
K8DS-PU1 is based on a microprocessor-based signal processor. It is designed to measure and monitor both current and voltage signals of a single or two-phase system, and to monitor the output relay status and provide a live output signal to indicate the output state.The input range of the device is from 0 to 10 Volts DC. The device is designed to measure both positive and negative voltages to an accuracy of 0.1 Volts. The device also supports a relay output which is normally open at 0 Volts and closed at Volts above 0.The current channel of the device has an input range of 0 to 6 Amps, with an accuracy of 0.1 Amps. The current channel automatically senses the current draw of the connected load and triggers an ON/OFF output control relay in response to the measured current. The device also features an analog output which is used to alert the user if the current exceeds a pre-defined threshold value. The display of the device allows the user to view the measured values, and change the settings of the relay output, such as the set point, as well as the hysteresis. The device can also be accessed remotely using a serial port, enabling the user to control and monitor the device, and to view the measured values.K8DS-PU1 is designed for use in a wide range of applications and is well suited for automotive applications. It is easy to install, highly reliable and cost effective. As it has a wide range of features, it is ideal for applications in motor control, DC power line monitoring, and industrial automation.The specific data is subject to PDF, and the above content is for reference
Latest Products
EISNNOA50A
CURRENT SWITCH 5-50A
2-1618068-1
21-890=WILMAR POWER MONITOR
ECSH3HF0.08D
RELAY CUR SENSE 24VDC 5-5A
CR7310-EL-120-.11-A-CD-EL...
REL AC GROUND FAULT SENS 120VAC
PPB01CM48
3-PHASE OVER/UNDER VOLT RLY
SM155115300
TACH RLY 300 RPM 115V