KA4558I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear amplifiers, such as the KA4558I, are a type of operational amplifier (op-amp) designed to perform signal amplification. They are often used in instrumentation and control applications, as well as buffer amplifiers. These amplifiers use linear amplification techniques to minimize changes in the waveform while providing a high degree of linearity upon output.

The KA4558I is well suited for instrumentation, control and buffer amplifier applications. Designed for low noise performance, the KA4558I is capable of providing a high degree of accuracy and linearity in a low-cost, single-package device. With a high voltage gain of 1000V/V and wide operating temperature range of 0°C to 70°C, the KA4558I is particularly well-suited for aircraft, military and medical applications.

In terms of the device\'s working principle, the KA4558I is an amplifier with two input terminals and one output terminal. The input on one side is called the “inverting” input, while the other is called the “non-inverting” input. The output is taken from the non-inverting input. The input signals are then amplified and applied to the output, producing a greater signal amplitude than the original input signals.

The operational amplifier has a differential amplification stage, where the difference between the two input signals (inverting and non-inverting) is amplified by a predetermined gain value. This gain or amplification value can be set by adjusting the feedback Resistors or capacitors. This process produces the amplified output signal which is then fed to the output.

The KA4558I also has built-in protection features to protect against accidental over-voltage or excessive temperature. Additionally, the device has a built-in over-temperature monitor which will shut off the chip if the temperature exceeds the specified maximum. This is especially useful in medical and military applications, where the device must operate in harsh environments without jeopardizing the safety of personnel or equipment.

In terms of noise performance, the KA4558I has a low-noise input stage, resulting in an excellent signal-to-noise ratio (SNR). This ensures that the input signal is accurately amplified without being degraded by internal noise. This allows the amplifier to provide more accurate results in applications requiring precise and reliable measurements.

Overall, the KA4558I is an excellent choice for instrumentation, control and buffer amplifier applications. It provides a high degree of linearity over a wide voltage and temperature range, and its built-in protection features make it suitable for use in harsh environments. Additionally, its low noise input stage ensures accurate amplification of input signals.

The specific data is subject to PDF, and the above content is for reference