Allicdata Part #: | KA741I-ND |
Manufacturer Part#: |
KA741I |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC OPAMP GP 8DIP |
More Detail: | General Purpose Amplifier 1 Circuit 8-DIP |
DataSheet: | KA741I Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Input Offset: | 2mV |
Base Part Number: | KA741 |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply, Single/Dual (±): | -- |
Current - Output / Channel: | 25mA |
Current - Supply: | 1.5mA |
Series: | -- |
Current - Input Bias: | 80nA |
Slew Rate: | 0.5 V/µs |
Output Type: | -- |
Number of Circuits: | 1 |
Amplifier Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The KA741I is an operational amplifier, which is an integrated circuit designed to manipulate and amplify electrical signals. It is one type of linear amplifier, and is used in a wide range of different applications in audio technology, automotive, industrial control, and other electronic systems. The KA741I is used in instrumentation, synthetic evaluation, signal compensation, and amplification.
The working principle behind the KA741I is based on the concept of the differential amplifier. This type of amplifier uses two different input signals, one at a low voltage and the other at a higher voltage, and amplifies the difference between the two. In the KA741I, voltage amplifications of up to 20,000 times can be achieved depending on the parameters set. The output voltage of the KA741I is then used as a base to other amplification stages in order to achieve an overall amplification of up to 100,000 times.
The KA741I is frequently used as an operational amplifier in a variety of circuit designs. In particular, it is often combined with capacitors or resistors in order to create an active low-pass filter, which is often used in applications such as audio playback systems to reduce distortion or in industrial control systems to improve signal accuracy. Additionally, the KA741I is commonly used in buffer amplifiers, which are designed to help ensure that signals are maintained at a constant strength throughout a circuit.
Instrumentation is one of the primary applications of the KA741I. It is combined with transducers, which are used to measure a range of physical phenomena such as temperature, pressure, and humidity. By using a KA741I amplifier, the output voltage can be increased by as much as 20,000 times, improving the accuracy of the measurement. Additionally, the amplified signal is then used as an input to the data acquisition system, which is used to record and store the measurements for later analysis. The KA741I is also used in electronic systems such as electrical circuits and robotics.
The KA741I is a versatile operational amplifier that can be used in a variety of applications and systems. It is often used as part of instrumentation systems to measure physical phenomena, as well as in buffer amplifiers, active low-pass filters, and other electronic systems. By utilizing the differential amplifier principle, the KA741I is able to output a voltage which has been amplified up to 20,000 times, providing the necessary accuracy and consistency required in many applications.
The specific data is subject to PDF, and the above content is for reference
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...