KBP2005GTB

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	50V
Current - Average Rectified (Io):	2A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 2A
Current - Reverse Leakage @ Vr:	5µA @ 50V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-ESIP
Supplier Device Package:	KBP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

A bridge rectifier, comprised of 4 diodes, is a type of rectifying circuit used to convert alternating current (AC) input into direct current (DC). The diodes permit current waveforms of one direction only, allowing the current to flow in either direction through the output while maintaining safe polarity. The diodes then convert the AC waveform into a smoother form of DC waveform by limiting the speed of the current waveform given to the output. Bridge rectifiers are commonly used in a variety of applications across a wide range of industries and technological systems. Certain types of power supplies, such as those found in automobiles, use the technology for both battery charging and the transfer of electrical energy. Other industries and systems, like telecommunication and HVAC, also make use of the bridge rectifier, although for different purposes. In these systems and industries, the bridge rectifier is ideal, as it can be adapted to each application and is typically very affordable. The device is highly efficient as it is able to maintain current while maintaining a low operating temperature due to its low thermal dissipations. KBP2005GTB bridge rectifiers are one type of bridge rectifier intended for power applications. The device is designed with four avalanche rugged insulated-gate bipolar transistors (igbts) and four high forward-breakdown voltage diodes with an integrated heat sink. These transistors and diodes are designed to provide with a wide range of voltage and current capabilities, producing up to 2.5kV and 25A, respectively. The bridge rectifier features soft-recovery characteristics to reduce the form of stress pulses given to the circuit, as well as reduce distortion of the output waveform. The unit also includes temperature and current limit protections to defend against thermal overload. Additionally, the device is equipped with a self-mite frequency-setting scheme for a regulated frequency, reducing the need for manual frequency setting. The KBP2005GTB is suitable for a variety of applications, including: uninterruptible power supplies, motor drives, solar-power rectification, wireless power transmission applications, as well as industrial control systems. The KBP2005GTB can be configured in a myriad of different ways, all depending on the application. It is usually connected to a filter circuit composed of an inductor and a capacitor to convert the current ripple into an even form of DC current. The filter connection is typically achieved by creating a full-wave or half-bridge connection between the rectifier and the filter. The device’s full-wave connection requires four diodes while the half-bridge connection requires 2 diodes and 2 capacitors. These connections to the rectifier and filter make use of both steady-state and transient operations, allowing the current to pass through the rectifier and filter even when there is a sudden change in input. The KBP2005GTB is a realiable and flexible option for a wide range of applications. It is a highly efficient bridge rectifier, with a temperature and current limit protections coupled with soft-recovery characteristics to ensure the stability of the output. Additionally, the device’s frequency-setting scheme eliminates the need for manual frequency tuning and its wide range of voltage and current capabilities can meet most power applications’ requirements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description