KBP206G Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are used in a variety of electronic applications, from voltage rectifiers to motor controllers. The KBP206G bridge rectifier is a general-purpose device intended for use in a variety of applications. Its power dissipation rating allows for current-limited operation and a wide range of operating temperatures.

KBP206G Overview

The KBP206G bridge rectifier is a 4-pin, single-phase package with a maximum current rating of 4 A. It has a maximum voltage rating of 560 V and a power dissipation rating of 2 W. The devices can be used in switching power supplies, voltage regulators, and other current-limiting applications.

The device features an internal diode for protection against reverse-voltage effects. The reverse-recovery time is 18 ns. The maximum surge voltage rating is 1160 V. The device also features internal fusing and current limiting which protect it against over-current and thermal overloads.

KBP206G Working Principle

Bridge rectifiers are designed to rectify alternating current (AC) to direct current (DC). Thus, they are often used to convert AC power to DC power in order to use it in various applications. The KBP206G is a 4-pin device that consists of four diodes, connected in a bridge configuration.

When AC power is applied to the device, the diodes conduct in alternating directions, allowing for unidirectional current flow through the device. This results in an output of DC power, depending on the polarity of the applied AC power.

When AC power is applied to the device, primary current flow occurs. As long as the current does not exceed the device’s maximum current rating, the device will operate normally. However, if the current exceeds the maximum current rating, the protection diodes inside the device will be activated and the excess current will be diverted to ground.

This protection feature prevents damage to the device and prolongs its life. Additionally, the device will enter a state of soft-start if the current exceeds the rated value, allowing the current to gradually increase without causing any sudden changes.

The device also features an internal current limiting function, allowing it to reduce the peak current without decreasing its power efficiency. This feature is particularly useful in applications where peak current control is required.

KBP206G Applications

The KBP206G bridge rectifier is suitable for a variety of rectification applications, from power supplies to motor controllers. It can also be used in charging circuits, voltage regulators, switching power supplies, and rectified AC/DC converters.

It is especially suitable for applications where inrush current, peak current, and efficiency are of paramount importance. Moreover, due to its robust construction and broad temperature range, the device is suitable for use in environments with fluctuating temperatures.

The device’s current-limited operation makes it suitable for applications where short-term overload protection is required, such as electric motors, power supplies, and high power-supply voltage controllers. Additionally, the device’s low-profile footprint makes it suitable for use in compact spaces.

Conclusion

The KBP206G bridge rectifier offers a reliable and robust solution for a wide range of rectification applications. Its robust construction and low-profile footprint allow for use in a variety of applications and environments. Furthermore, its current-limited operation and broad temperature range make it suitable for applications where inrush current, peak current, and thermal protection are of paramount importance.

The specific data is subject to PDF, and the above content is for reference