KBU8A-E4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are an essential component in many electronic systems both industrial and domestic. They are used to process AC signals into DC signals, changing the direction of current in order to store energy and/or provide a steady voltage or current to power electronic components. The KBU8A-E4/51 rectifier is one such component, and it is a common choice due to its rugged construction, cost-effectiveness, and wide working range.

The KBU8A-E4/51 bridge rectifier is a symmetric, single-phase full-wave bridge rectifier with a single, bridge-connected diode. It consists of four diodes arranged in a bridge circuit so as to convert AC input voltage into a DC output voltage, as shown in Figure 1. The four legs of the bridge circuit are connected to a metal case, with two terminals for the AC input and two for the DC output. The metal case acts as a heat sink, dissipating heat generated by the rectifier due to the power losses in the diodes.

The KBU8A-E4/51 bridge rectifier is rated for a maximum AC input voltage of 1000V at a frequency of 50 or 60 Hz. The maximum DC output voltage is 800V, with a DC output current of 1.8A. The rectifier is also rated for a surge current up to 5A, depending on the application. The operating temperature range of the bridge rectifier is -40°C to 110°C, and the maximum junction temperature is 150°C. The rectifier has a low forward voltage drop of about 0.4V.

The KBU8A-E4/51 bridge rectifier is designed for use in general-purpose applications, such as resonant circuit converters, free-wheeling or commutating diodes, voltage multiplier circuits, and phase control circuits. It is also suitable for use in protector circuits, voltage stabilizer circuits, DC power supply circuits, and rectifying circuits. The rectifier is especially useful for applications that require a high-power device but with a relatively low cost.

The working principle of the KBU8A-E4/51 bridge rectifier is simple. When an AC current is applied to the input, the AC current is applied to the diode bridge and the diodes start passing current accordingly. Depending on the direction of the AC current, the bridge rectifier will either pass current from one side of the bridge to the other, or block the current. As a result, AC current is rectified and converted into a DC current, which is then output at the DC output terminals.

In summary, the KBU8A-E4/51 bridge rectifier is a robust and cost-effective bridge rectifier with a wide range of applications. It is suitable for a wide range of purposes, from resonant circuit converters to voltage stabilizer circuits. The rectifier is capable of handling up to 1000V AC input voltage, and the maximum output voltage is 800V. The maximum surge current rating is 5A, and the operating temperature range is -40°C to 110°C. The working principle of the rectifier is simple, and it is a reliable and high-performance option for many applications.

The specific data is subject to PDF, and the above content is for reference