KBU8M-E4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are an important type of diode, and the KBU8M-E4/51 is an example of such a rectifying bridge. This part is part of a larger bridge rectifier circuit, and it is used for high-power applications, mainly for the purpose of converting an alternating current (AC) into direct current (DC).

A bridge rectifier is a full-wave rectifier constructed from four individual diodes in a bridge formation. The KBU8M-E4/51 is a single-phase bridge rectifier, meaning that it can only be used in circuits with single-phase alternating current input. The KBU8M-E4/51 is commonly used in AC-to-DC power supplies found in industrial or commercial applications.

In operation, the four diodes of the bridge rectifier form a square pattern. The alternating current (AC) enters one side of the bridge through the input terminals and then passes through each diode in turn such that it is alternatively rectified and inverted. This causes the output signal to alternate between positive and negative in a unipolar (single-polarity) signal. Subsequently, this unipolar signal is smoothed by a filter component to produce a direct output current.

The KBU8M-E4/51 can handle a maximum peak repetitive reverse voltage of 8KV and has a forward voltage drop of 1.8V at 0.6Adc. This bridge rectifier also features a low reverse leakage current of less than 50μA, making it suitable for power supply applications where energy efficiency is a priority. In addition, the KBU8M-E4/51 has a maximum reverse avalanche energy rating of 5 mJ, which reduces the likelihood of electrical failure under extreme conditions.

In conclusion, the KBU8M-E4/51 is a single-phase bridge rectifier designed for high-power applications such as AC-to-DC power supplies. This part features a maximum peak repetitive reverse voltage of 8KV, a forward voltage drop of 1.8V at 0.6Adc, and a reverse leakage current of less than 50μA. Additionally, this bridge rectifier has a maximum reverse avalanche energy rating of 5 mJ.

The specific data is subject to PDF, and the above content is for reference