KRPA-11AY-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays with over 2 Amps capacity are an integral part of any modern production system or industrial environment. The KRPA-11AY-24 is one such power relay, which is designed to satisfy the needs of high-power applications. This article will discuss the application field and working principle of the KRPA-11AY-24 power relay.

The KRPA-11AY-24 power relay is designed for use in high-power applications as well as some moderate load applications. This relay is rated for a switching capacity of up to 24A with AC voltage of up to 240VAC. It also has a maximum contact-to-contact resistance of 150 mΩ and a minimum isolation resistance of 1000 mΩ, making it very suitable for high-power applications. The relay has a nominal contact rating of 5A, which is sufficient for most commercial and industrial applications.

In terms of its application field, the KRPA-11AY-24 power relay is generally used for general-purpose switching in industrial production systems, in particular for controlling loads that require switching current of up to 24A. Typical applications for this relay include the operation of motors, heating elements, lamps, and similar equipment. The relay is also used in many home automation applications, such as controlling lighting, ventilation, heating, and cooling systems.

The KRPA-11AY-24 power relay works on the principle of electrical switching. It utilizes a highly-insulated switch in order to control the current flow. The relay has two basic operation modes: the normally open mode, and the normally closed mode. In the normally open mode, the contact will remain open until the control voltage is applied, upon which it will close and allow current to flow. In the normally closed mode, the contact will remain closed until the control voltage is applied, upon which it will open and stop the current flow.

The KRPA-11AY-24 power relay also has a built-in timer, called a time-delay feature, which is used to control the length of the switch cycle. The length of time delay, in minutes or seconds, can be programmed using the timer module. The delay timer is used to provide an extra level of control over the switch operation, allowing for better optimization of switching operations or to prevent unwanted switch cycles.

The KRPA-11AY-24 power relay is designed for use in applications requiring both high power and reliable switching. Its built-in timer and adjustable contact ratings make it suited for a wide range of applications. The relay is very simple to install and use, and can provide reliable performance in various kinds of high-power applications.

The specific data is subject to PDF, and the above content is for reference