KSZ8041RNLI-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

KSZ8041RNLI-TR is a 10/100Mbps low-power Ethernet physical layer (PHY) transceiver designed for use on existing Cat.5 physical media. It is designed to comply with the IEEE 802.3U standard and supports data rates up to 100Mbps in half-duplex mode or 10Mbps in full-duplex mode.

The KSZ8041RNLI-TR PHY utilizes a four-class segmented MII (Media Independent Interface) for communication with the host microcontroller. The four-class MII provides access to extended registers for special functions such as simple auto-negotiation, diagnostics,and two-port addressing. The low-power KSZ8041RNLI-TR is fully compliant with both 1000BaseT and 100BaseT requirements (Ethernet standards), including Tx and Rx signaling. This PHY transceiver supports adaptive mixing for wide cable compatibility and has a maximum cable length of up to 100 meters, supporting Power-down, Sleep, and Wake mode.

The interface of the KSZ8041RNLI-TR is composed of three major parts: drivers, receivers and transceivers. The drivers provide the signal power to the cables and the transceivers control the data flow between the PHY and the cables. The receivers convert the received signals into a digital format which can then be handled by the PHY. Additionally, the interface also features an LED transceiver and adjustable termination resistors which can be used to isolate the PHY from the network and to customize the PHY\'s impedance matching.

In addition to providing input/output data interfaces and power supply and ground terminals, the KSZ8041RNLI-TR also includes a crystal oscillator and an on-board clock generator. This enables the device to output a system clock with a frequency which is 25MHz or 50MHz. The on-board clock generator can also be used to provide timing for special functions such as auto-negotiation, diagnostics, and two-port addressing.

The main application areas for the KSZ8041RNLI-TR PHY transceiver include data communication networks, industrial automation, automotive, and consumer electronics. It is well-suited for use in several types of embedded systems, network switches, and other systems which require fast data transfers over a physical medium.

The working principle of the KSZ8041RNLI-TR PHY transceiver is really quite simple. It receives a signal from a media interface and converts it into a digital signal which is then transmitted to the host microcontroller. The transceiver then receives the signal from the host microcontroller, converts it into an analogue signal, and transmits it across the network cable. It also contains numerous features such as auto-negotiation and two-port addressing which make it suitable for a variety of applications.

The KSZ8041RNLI-TR PHY transceiver is an excellent choice for those who require a fast and reliable means of communication. Its four-class segmented MII, adaptive mixing, and on-board clock generator make it an ideal solution for a wide variety of data communication networks and embedded systems. With its low-power consumption and long cable lengths, it is also a great choice for consumer electronics, industrial automation, and automotive applications.

The specific data is subject to PDF, and the above content is for reference