KSZ8051MNL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The KSZ8051MNL is a physical layer transceiver integrated circuit manufactured by Microchip Technology. It is a low-cost, low-power, single-channel transceiver used in Ethernet applications. This device supports a host of features including full-duplex communications and multiple clock domains. It is designed to interface to the common Ethernet media, including crossed-pair copper wires, optical fibers, and physical layer switches.

The KSZ8051MNL operates on a 5-volt supply, consumes only 800mW of power, and is based on a double-edge clocked architecture. The device features a 32/64-byte FIFO for easy packet handling. It supports both standard and low-power modes to optimize power consumption based on link activity. It also contains an on-chip E-EEPROM, which supports the auto-negotiation of link parameters with other compatible devices.

This device supports full-duplex communications to provide simultaneous transmission and reception of signals. It also supports auto-negotiation at both the link and the PCS layers to handle the various bandwidth requirements. The built-in three-port repeating capability enables the device to be used in point-to-point, point-to-multipoint, or multipoint-to-multipoint networks.

The KSZ8051MNL has a single clock domain, which eliminates the need for external bus arbitration and eliminates the need for dedicated address lines. This simplifies the system design and reduces board space. The device has a built-in elastic buffer that can provide up to 10ms of buffering to absorb any potential jitter on the input or output lines. The device also has an on-chip spread-spectrum clock generator, which helps improve compatibility with other Ethernet devices.

The KSZ8051MNL\'s basic working principle is based on the fact that it uses a PLL (phase locked loop) to lock the output data stream to its internal clock, thereby eliminating any clock jitter on the output line. The device then performs 8B/10B encoding to generate high-speed serial data streams. The 8B/10B encoding ensures that there is never a long run of consecutive ones or zeros in the data stream, which helps reduce EMI emission. The device then sends the serial data stream over the physical medium. The receiver end then decodes the data stream and sends it back to the sender.

The KSZ8051MNL is an ideal chip for use in lots of Ethernet applications including switched networks and fiber to the Ethernet applications. The built-in clock synthesizer and auto-negotiation features make it ideal for use in multi-speed applications. The device is also suitable for automotive, industrial automation, and consumer applications that require low power consumption and small form factor.

The specific data is subject to PDF, and the above content is for reference