KSZ8873MLL-AM-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface controllers are useful devices in the field of computer communication. They provide a physical link between two or more computer components, allowing them to exchange data. The KSZ8873MLL-AM-TR is a type of interface controller designed by Micrel Inc., following the Fast Ethernet and IEEE802.3 Level 2 protocol. This article will discuss the application fields and working principle of the KSZ8873MLL-AM-TR.

Applications

The KSZ8873MLL-AM-TR is a high-performance, low-cost, three-port controller designed to support multiple communication types. It is primarily used as a high-speed link between a LAN (Local Area Network) and its devices. This device is suitable for enterprise network applications due to its ability to provide a high-performance connection over longer distances. As a three-port controller, it can support three different types of network connections: 10Base-T, 100Base-TX and 1000Base-T.

The device is also highly suitable for applications such as bridges, modems, routers and switches. It can be used as a bridge or switch between two or more Ethernet networks or can be used in a router to connect two or more networks. The device is also capable of providing a high-speed connection between two or more IP (Internet Protocol) networks.

The device is also suitable for use in applications such as gaming consoles, VoIP (Voice over IP) phones, and wireless routers. It can provide a high-speed connection between a gaming console and its network, VoIP phone and its network and wireless router and its network. The device can also be used in power over Ethernet (PoE) applications, where an external power source is used to provide power to connected devices.

Working Principle

The working principle of the KSZ8873MLL-AM-TR is based on the Ethernet protocol, and it provides a physical link between two or more components. It works by translating the data signals that are sent over the cables, turning them into electrical signals that can be received and understood by the connected devices.

The device is designed to achieve high data transfer speeds, up to 1Gbps on the 1000Base-T connection. It does this by using a system of parallel transmission on each of the three ports, sending multiple frames of data at once in order to achieve high data transfer speeds.

The device supports two flow control mechanisms, which are used to prevent data loss during high-speed transfers. The first is Link Flow Control (LFC) and the second is Back Pressure Flow Control (BPFC). LFC is used to prevent data from being lost when the transmission speed exceeds the receiver’s capacity, while BPFC is used to increase the transmission speed when the receiver’s capacity is exceeded.

The device also has built-in error checks, which are used to ensure that the transmitted data is correct. Error checks are performed upon receiving data and can detect errors that may have occurred during transmission. If an error is detected, the device will resend the data, ensuring that no data is lost.

Finally, the device is capable of configuring itself automatically when it detects changes in the connected networks. This feature allows the device to quickly adapt to changing requirements and ensure that the data is correctly transmitted.

Conclusion

The KSZ8873MLL-AM-TR is a type of interface controller designed by Micrel Inc. It is a high-performance, low-cost, three-port controller that can support a variety of communication types. It is suitable for a wide range of applications, such as enterprise networks, bridges, modems, gaming consoles, VoIP phones, routers and switches. The device is capable of providing high-speed connections between two or more components and can be set up to automatically configure itself when changes occur in the connected networks.

The specific data is subject to PDF, and the above content is for reference