L03S200D15WM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current transducers are devices used to measure and control electrical current, either directly or indirectly. The L03S200D15WM is an example of a current transducer used to measure direct current. This device is used in a variety of applications, such as motor control, circuit protection, and power conditioning.

The L03S200D15WM works by detecting the presence of an AC or DC current, then outputting a voltage along the signal line proportional to the amount of current. This allows the device to detect the current and convert it into an electrical signal that can be used for further analysis or control. The device also includes a built-in signal amplifier, which increases the accuracy of the detected current.

The L03S200D15WM current transducer has a maximum current rating of 200A and a scale selection of +/- 15 to 400VDC. It operates on a power supply voltage range of 12Vdc to 24Vdc, with tolerance of +/- 10%. The device is also designed for good consistency and accuracy, with an offset voltage of less than 1mV and a linearity of 0.3%. Finally, it has a frequency bandwidth of 0-200kHz.

The L03S200D15WM current transducer has a number of applications. It can be used to measure current in motor control systems for motors up to 200A, to protect a circuit from over-current, or to power condition a system. It can also be used to monitor the current and voltage of a system in order to ensure the efficiency of the system. Additionally, it can be used to measure and control current in power systems providing current control for high-power loads.

The working principle of the L03S200D15WM current transducer is based on the fact that when an AC or DC current is flowing through a conductor, an electromagnetic field is created. This field induces a voltage across the conductor, which is proportional to the amount of current passing through it. The device uses this voltage to calculate the current and then outputs a voltage signal that is proportional to the current.

In summary, the L03S200D15WM current transducer is a device used in a variety of applications such as motor control, circuit protection, and power conditioning. It works by detecting the presence of an AC or DC current, then outputting a voltage along the signal line proportional to the amount of current. This allows the device to detect the current and convert it into an electrical signal for further analysis or control. The device also includes a built-in signal amplifier, which increases the accuracy of the detected current. The L03S200D15WM current transducer is a valuable instrument to have in any laboratory setting, as it allows for accurate and precise measurements and control of current.

The specific data is subject to PDF, and the above content is for reference