L5300EPTTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

L5300EPTTR Application Field and Working Principle

L5300EPTTR is a high performance low power Voltage Regulator in the Linear Power Management Integrated Circuits (PMIC - Linear) series of STMicroelectronics. This device is specifically designed to be used in Automotive and Industrial applications, such as LED illumination, motor control, intelligent sensors and more.

L5300EPTTR is based on a ultra-low dropout voltage regulator (ULDOR) which works at near-zero input and output voltage for improved system reliability and performance. This device features extremely low quiescent current and excellent output voltage accuracy, enabling effective power saving and thermal management. The main features of L5300EPTTR are as follows:

• External programmable operating range: 2.2V to 5.5V input voltage, 0.6V to 3.6V output voltage.
• up to 500mA output current.
• Excellent load regulation: 0.3% max.
• Low quiescent current Consumption: 20uA max at no load.
• Accurate output voltage control.
• Programmable switching frequency: 100KHz ~ 1MHz.
• Input and output short-circuit protection.
• Internal soft-start circuitry.
• Thermal shutdown protection.
• High efficiency: up to 95%.

It is a highly configurable device which includes a voltage regulation loop that can be programmed to achieve a wide range of positive and negative voltage output levels with very high accuracy. As shown in the diagram below, the input of the device is the external voltage source and the output is the regulated voltage. The voltage regulation loop consists of two main components: an error amplifier and a pass element. The error amplifier measures the output voltage and compares it with the reference voltage. If the output voltage is higher than the reference voltage, the amplifier will reduce the base voltage of the pass element. If the output voltage is lower than the reference voltage, the amplifier will increase the base voltage of the pass element to improve output voltage accuracy.

The pass element of the circuit is a power transistor which is used to control the power flow from the input to the output. It adjusts the voltage output based on the signal from the error amplifier. The pass element can be either a MOSFET or a bipolar transistor, depending on the application. The last component of the voltage regulation loop is the feedback or compensation network, which is used to adjust the gain of the error amplifier and reduce noise at the output. The compensation network is connected to the junction between the pass element and the output.

In addition to the voltage regulation loop, the L5300EPTTR also includes protection features such as current limit, thermal shutdown and short-circuit protection. The current limit feature allows the device to limit the maximum output current to prevent damage to the load in case of an overload. The thermal shutdown feature prevents the device from overheating and damaging the load by shutting down the device when the junction temperature exceeds a certain threshold. Finally, the short-circuit protection feature protects the device from damage due to an unexpected short-circuit between the input and output.

The L5300EPTTR from STMicroelectronics is an advanced low power voltage regulator that provides improved system reliability and performance for automotive and industrial applications. It features an ultra-low dropout voltage regulator, low quiescent current consumption and highly accurate output voltage control , an input and output short circuit protection, and thermal shutdown protection. The wide operating range, high accuracy and low power consumption make this device ideal for use in LED illumination, motor control, intelligent sensors, and other applications.

The specific data is subject to PDF, and the above content is for reference