L601E8RP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

Thyristors are a family of semiconductor switches that are used for switching and controlling higher voltage, higher power, and higher current applications. Among the types of thyristors are TRIACs, which are used in various power control applications. One of the commonly used TRIACs is the L601E8RP.

L601E8RP Application Field and Working Principle

The L601E8RP is a 600V, 8A, non-zero crossing, 4-quadrant 12-pin TRIAC with a mainly intended application in solid-state relays, AC motor speed controls, and many other power control applications such as contactors, thermostats, heater controls, and lighting dimmers. The L601E8RP has a gate current trigger range of 3mA - to 20mA, and its blocking voltage is 600V.

The working principle of the L601E8RP is based on the thyristor gate drive principle, wherein a low-level current is introduced in the gate trigger, triggering the main thyristor junction. Upon triggering the gate, an AC voltage is applied across the main thyristor junction, allowing the AC current to flow through it. This in turn allows power to control various applications, as discussed before. It is important to note that the current should be stopped at the same time when the AC voltage is removed for the thyristor to cease operating.

The L601E8RP is capable of operating with an overload capacity of up to 8A for overload current applications. This is sufficient for most AC motor speed control applications, however, it is important to note that the overload capacity can vary from application to application. In addition to overload capacity, the L601E8RP has a blocking voltage of 600V and a maximum sustained voltage of 1200V, which is suitable for most AC motors. It is also important to note that the L601E8RP must be protected from high-frequency noise and other hazardous conditions.

The L601E8RP is available in a variety of options, including the FORM-C contact configuration, the FORM-C contact connection configuration, and the 12-pin configuration. The FORM-C contact configuration provides two switch poles, while the FORM-C contact connection configuration provides four switch poles. Finally, the 12-pin configuration is used for higher current requirements.

The L601E8RP is an ideal TRIAC for various power control applications. It is capable of controlling high-voltage circuits, is highly reliable, and has an overload capacity of up to 8A. Additionally, the L601E8RP has various options for contact configuration, allowing for various necessary connections. It is a cost-effective, efficient, and reliable TRIAC for various applications.

The specific data is subject to PDF, and the above content is for reference