L6X8E6

Series:	--
Packaging:	Bulk
Part Status:	Active
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	800mA
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	8.3A, 10A
Current - Gate Trigger (Igt) (Max):	5mA
Current - Hold (Ih) (Max):	10mA
Configuration:	Single
Operating Temperature:	-65°C ~ 110°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 (TO-226AA)
Supplier Device Package:	TO-92

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Thyristors - TRIACs

Thyristors - TRIACs are a type of power semiconductor used in all sorts of applications, from big industrial applications to everyday home appliances. Thyristors - TRIACs are versatile components, as they are capable of performing a range of functions, including opening and closing electrical circuits, controlling the speed of motors, and providing electrical timing operations.

What is an L6X8E6?

The term L6X8E6 is a classification system for triacs. \'L\' refers to the phase control use, \'6\' is the maximum current the chip will carry, \'X\' is the maximum voltage the chip is rated for, and \'E6\' is the type of chip it is. An L6X8E6 TRIAC is therefore suitable for phase control of up to 6 Amps and a maximum of 800 Volts.

Applications of L6X8E6 TRIACs

L6X8E6 TRIACs are primarily used in power converters, AC motor controllers and power supplies. Some common applications include air conditioners and washing machines, where the TRIACs are used to switch the motors on and off, and to control the speed of the motors.

Working Principle of L6X8E6 TRIACs

Essentially, an L6X8E6 TRIAC works by two gates, a positive and a negative gate, which are connected to two power buses. When the positive gate is activated, it triggers the activating current which causes the core of the TRIAC to turn on. This allows current to flow from the positive to the negative terminals, and vice versa, allowing the TRIAC to conduct electricity from one side, when necessary.Once the TRIAC is activated, the current flow between the two power buses will remain steady until the TRIAC is deactivated. The TRIAC is deactivated by turning off the current flow from the positive gate, which causes the core of the TRIAC to turn off, interrupting the flow of current from the two power buses.

Conclusion

In conclusion, L6X8E6 TRIACs are a type of power semiconductor used in a variety of applications to control the switching of voltage and current. The TRIACs are activated by a positive gate and deactivated by negative gate, and can handle a load of up to 6 Amps and 800 Volts. As such, they are a popular choice of semiconductor for a range of power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description