LA1787M-MPB-E RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF receivers are used to detect and receive radio frequency signals. The LA1787M-MPB-E is one type of RF receiver used to detect and amplify weak radio signals. The LA1787M-MPB-E is a single-conversion superhet receiver. It consists of two main parts, including the detector and the RF amplifier.

Application Field: The LA1787M-MPB-E has a wide range of applications, from single-channel or multi-channel airborne receivers, to marine and broadcasting receivers. In particular, the device is well suited for airborne receivers, since the device can provide excellent sensitivity when used for single and two channels. In addition, LA1787M-MPB-E is often used in marine radio communication systems, such as single-sideband and CW, as well as radio telephones.

Working Principle: The LA1787M-MPB-E has two primary functions: the detector and the RF amplifier. The detector is used to detect and amplify weak radio frequency signals. The RF amplifier is used to further amplify the signal strength by increasing current gain and reducing noise level. The LA1787M-MPB-E is designed to work efficiently with very low noise.

The device is designed with a low impedence mixer transistor for the detection of weak signals, and a transistor amplifier for signalstrength amplification. The signal is then amplified using high and low frequency selection to increase the signal-to-noise ratio. The input frequency of the LA1787M-MPB-E must be within 100kHz to 10MHz. The output signal is available with the input signal on the input-output terminal. The output level must be adjusted between -20 dBm and 10 dBm to prevent saturation, and the output frequency must be adjusted between 2.4MHz and 10 MHz.

The device is typically deployed with some additional components, such as an antenna and transistor amplifiers. The antenna allows the device to receive signals over long distances and ensures that the signal is properly received. The transistor amplifiers then amplify the signal strength by increasing current gain and reducing noise level. The output can be used for further processing and analysis.

The LA1787M-MPB-E is an excellent device for detecting weak radio frequency signals and can be used in a wide variety of applications. Its low-noise design allows for efficient signal detection and amplification, and its low impedence mixer transistor ensures that the signal-to-noise ratio is optimized for improved reception. As a single-conversion superhet receiver, the device amplifies the signal strength through high and low-frequencyselection, making it an ideal choice for various types of radio communication systems.

The specific data is subject to PDF, and the above content is for reference