Allicdata Part #: | LBUM11173-ND |
Manufacturer Part#: |
LBUM11173 |
Price: | $ 27.26 |
Product Category: | Uncategorized |
Manufacturer: | Laird Technologies IAS |
Short Description: | MOUNT UTLTY BRKT NMO/CHR |
More Detail: | N/A |
DataSheet: | LBUM11173 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 24.78420 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
BUM11173 is a semiconductor device that is designed for high current switching applications. It is used in various applications such as power electronics, automotive, communications and industrial systems. The device is suitable for multiple voltage levels, ranging from 00V to 600V.
The BUM11173 is a three-terminal device that consists of two MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) connected in parallel. It is designed to perform at have switching speeds and low on-state resistance. It also has a low quiescent current and a maximum thermal resistance of 10 Ω-C. The device is also protected against transient overvoltage and over-current conditions, reducing the probability of device failure.
The working principle of the BUM11173 is relatively simple. It utilizes two MOSFETs in parallel, each with separate drain, gate and source connections. When the device is in the off-state, the gate voltage is essentially zero, preventing current from flowing between the drain and the source. When the gate voltage is increased, the two MOSFETs turn on and current can flow through the device. The device is then in its on-state with the gate voltage at its maximum of 10V.
The BUM11173 is typically used in high-power applications such as motor controls, relay controls, and driving resistive and inductive loads. The device can operate as a switch, allowing loads to be turned on and off, or can be used to regulate current. The device is also often used in applications such as DC-DC conversion, where it is used to control the output voltage of a voltage conversion circuit. It can also be used for lighting applications, where it is used to switch a lighting circuit on and off.
The BUM11173 is a powerful device designed for switching high current loads. It is suitable for multiple voltage levels, has an excellent on-state resistance and a low quiescent current. It is suitable for high-power switching applications, and is often used in motor control, lighting and DC-DC conversion circuits. Its simple working principle makes it an ideal choice for numerous applications.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE